Hi,
some nit-picks as well as my Tested-by (in case it's not too late) below.
thank you for taking care of this!
On Thu, Jan 10, 2019 at 4:40 PM Loys Ollivier <lollivier@xxxxxxxxxxxx> wrote:
>
> Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
> changed the behavior of "cd-inverted" to follow the device tree bindings
> specification.
> Lines specifying "cd-inverted" are now "active high".
this depends on the polarity from the cd-gpios property. above commit
caused cd-inverted to be applied twice (effectively making it a
no-op). thus "cd-inverted" only means "active high" if cd-gpios also
sets GPIO_ACTIVE_HIGH. if the polarity in cd-gpios is GPIO_ACTIVE_LOW
together with "cd-inverted" then the GPIO will be treated as active
low.
> Fix the SD card for meson by setting the cd-gpios as "active low" according
> to the boards specifications.
not only switching to GPIO_ACTIVE_LOW, also dropping "cd-inverted"
> Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
in my patches for the 32-bit boards I used the commit which added SD
card support to the board for the Fixes tag. however, I'm fine with
this as well (I just wanted to point out that there's a small
difference in our commits).
> Signed-off-by: Loys Ollivier <lollivier@xxxxxxxxxxxx>
on my Khadas VIM(1), using Kevin's v5.0/fixes branch:
Tested-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
Regards
Martin
