In commit 5320226a0512 ("mmc: core: Disable HPI for certain Hynix eMMC
cards"), then intent was to prevent HPI from being used for some eMMC
cards, which didn't properly support it. However, that went too far, as
even BKOPS and CACHE ctrl became prevented. Let's restore those parts and
allow BKOPS and CACHE ctrl even if HPI isn't supported.
Fixes: 5320226a0512 ("mmc: core: Disable HPI for certain Hynix eMMC cards")
Cc: Pratibhasagar V <pratibha@xxxxxxxxxxxxxx>
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
---
drivers/mmc/core/mmc.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 1b8d38f54f65..cb98d30df409 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -526,8 +526,7 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd)
card->cid.year += 16;
/* check whether the eMMC card supports BKOPS */
- if (!mmc_card_broken_hpi(card) &&
- ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1) {
+ if (ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1) {
card->ext_csd.bkops = 1;
card->ext_csd.man_bkops_en =
(ext_csd[EXT_CSD_BKOPS_EN] &
@@ -1796,8 +1795,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
* If cache size is higher than 0, this indicates
* the existence of cache and it can be turned on.
*/
- if (!mmc_card_broken_hpi(card) &&
- card->ext_csd.cache_size > 0) {
+ if (card->ext_csd.cache_size > 0) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_CACHE_CTRL, 1,
card->ext_csd.generic_cmd6_time);
--
2.17.1
