With some eMMC devices, there is still issues with the new phase
settings. Enabling signal resampling seems to solve the problem
for these.
Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
---
drivers/mmc/host/meson-gx-mmc.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 837bed0b8c01..c2690c1a50ff 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -66,6 +66,9 @@
#define SD_EMMC_DELAY 0x4
#define SD_EMMC_ADJUST 0x8
+#define ADJUST_ADJ_DELAY_MASK GENMASK(21, 16)
+#define ADJUST_DS_EN BIT(15)
+#define ADJUST_ADJ_EN BIT(13)
#define SD_EMMC_DELAY1 0x4
#define SD_EMMC_DELAY2 0x8
@@ -143,6 +146,7 @@ struct meson_mmc_data {
unsigned int tx_delay_mask;
unsigned int rx_delay_mask;
unsigned int always_on;
+ unsigned int adjust;
};
struct sd_emmc_desc {
@@ -1162,7 +1166,7 @@ static int meson_mmc_get_cd(struct mmc_host *mmc)
static void meson_mmc_cfg_init(struct meson_host *host)
{
- u32 cfg = 0;
+ u32 cfg = 0, adj = 0;
cfg |= FIELD_PREP(CFG_RESP_TIMEOUT_MASK,
ilog2(SD_EMMC_CFG_RESP_TIMEOUT));
@@ -1173,6 +1177,10 @@ static void meson_mmc_cfg_init(struct meson_host *host)
cfg |= CFG_ERR_ABORT;
writel(cfg, host->regs + SD_EMMC_CFG);
+
+ /* enable signal resampling w/o delay */
+ adj = ADJUST_ADJ_EN;
+ writel(adj, host->regs + host->data->adjust);
}
static int meson_mmc_card_busy(struct mmc_host *mmc)
@@ -1396,12 +1404,14 @@ static const struct meson_mmc_data meson_gx_data = {
.tx_delay_mask = CLK_V2_TX_DELAY_MASK,
.rx_delay_mask = CLK_V2_RX_DELAY_MASK,
.always_on = CLK_V2_ALWAYS_ON,
+ .adjust = SD_EMMC_ADJUST,
};
static const struct meson_mmc_data meson_axg_data = {
.tx_delay_mask = CLK_V3_TX_DELAY_MASK,
.rx_delay_mask = CLK_V3_RX_DELAY_MASK,
.always_on = CLK_V3_ALWAYS_ON,
+ .adjust = SD_EMMC_V3_ADJUST,
};
static const struct of_device_id meson_mmc_of_match[] = {
--
2.19.2
