[PATCH V3 2/3] mmc: sdhci-omap: Add using external dma

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



sdhci-omap can support both external dma controller via dmaengine framework
as well as ADMA which standard SD host controller provides.

Signed-off-by: Chunyan Zhang <zhang.chunyan@xxxxxxxxxx>
---
 drivers/mmc/host/Kconfig      |  1 +
 drivers/mmc/host/sdhci-omap.c | 10 ++++++++++
 2 files changed, 11 insertions(+)

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 3101da6..7846754 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -969,6 +969,7 @@ config MMC_SDHCI_XENON
 config MMC_SDHCI_OMAP
 	tristate "TI SDHCI Controller Support"
 	depends on MMC_SDHCI_PLTFM && OF
+	select MMC_SDHCI_EXTERNAL_DMA if DMA_ENGINE
 	help
 	  This selects the Secure Digital Host Controller Interface (SDHCI)
 	  support present in TI's DRA7 SOCs. The controller supports
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index 88347ce..b164fcc 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -896,6 +896,7 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	const struct of_device_id *match;
 	struct sdhci_omap_data *data;
 	const struct soc_device_attribute *soc;
+	struct resource *regs;
 
 	match = of_match_device(omap_sdhci_match, dev);
 	if (!match)
@@ -908,6 +909,10 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	}
 	offset = data->offset;
 
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs)
+		return -ENXIO;
+
 	host = sdhci_pltfm_init(pdev, &sdhci_omap_pdata,
 				sizeof(*omap_host));
 	if (IS_ERR(host)) {
@@ -924,6 +929,7 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	omap_host->timing = MMC_TIMING_LEGACY;
 	omap_host->flags = data->flags;
 	host->ioaddr += offset;
+	host->mapbase = regs->start;
 
 	mmc = host->mmc;
 	sdhci_get_of_property(pdev);
@@ -991,6 +997,10 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	host->mmc_host_ops.execute_tuning = sdhci_omap_execute_tuning;
 	host->mmc_host_ops.enable_sdio_irq = sdhci_omap_enable_sdio_irq;
 
+	/* Switch to external DMA only if there is the "dmas" property */
+	if (of_find_property(dev->of_node, "dmas", NULL))
+		sdhci_switch_external_dma(host, true);
+
 	ret = sdhci_setup_host(host);
 	if (ret)
 		goto err_put_sync;
-- 
2.7.4




[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux