On Sun, Nov 04, 2018 at 09:37:07PM +0100, Marek Vasut wrote: > The eMMC card has two supplies, VCC and VCCQ. The VCC supplies the NAND > array and the VCCQ supplies the bus. On Salvator-X and ULCB, the VCC is > connected to 3.3V rail, while the VCCQ is connected to 1.8V rail. Adjust > the pinmux to match the bus, which is always operating in 1.8V mode. > > While at it, deduplicate the pinmux entries, which are now the same for > both default and UHS modes. We still need the two pinctrl entries to > match the bindings though. > > Signed-off-by: Marek Vasut <marek.vasut+renesas@xxxxxxxxx> > Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> > Cc: Simon Horman <horms+renesas@xxxxxxxxxxxx> > Cc: Wolfram Sang <wsa@xxxxxxxxxxxxx> > Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> > Cc: linux-renesas-soc@xxxxxxxxxxxxxxx > Cc: linux-mmc@xxxxxxxxxxxxxxx Tested on M3-N and H3 ES2.0 with HS400 enabled eMMC: Reviewed-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> Tested-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
Attachment:
signature.asc
Description: PGP signature
