Re: [PATCH v4 0/3] mmc: tmio_mmc: Add support for RZ/A2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12 October 2018 at 14:29, Chris Brandt <chris.brandt@xxxxxxxxxxx> wrote:
> Basically the same HW block that was used in R-Car Gen 3 is used in
> RZ/A2 (with only a couple small differences).
>
> Not sure if you're going to like the Kconfig change or not.
>
> Chris Brandt (3):
>   clk: renesas: r7s9210: Add SDHI clocks
>   mmc: renesas_sdhi_internal_dmac: Add R7S9210 support
>   dt-bindings: mmc: tmio_mmc: Document Renesas R7S9210
>
>  Documentation/devicetree/bindings/mmc/tmio_mmc.txt |  3 ++-
>  drivers/clk/renesas/r7s9210-cpg-mssr.c             |  5 ++++
>  drivers/mmc/host/Kconfig                           |  5 ++--
>  drivers/mmc/host/renesas_sdhi_internal_dmac.c      | 28 ++++++++++++++++++++--
>  4 files changed, 36 insertions(+), 5 deletions(-)
>
> --
> 2.16.1

This looks good to me. So unless someone objects I intend to queue
this up for 4.21, once 4.20 rc1 is out. Or perhaps the clock patch
should go via the clock tree?

Thanks!
Uffe



[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux