Re: [PATCH v2] block: BFQ default for single queue devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> Il giorno 15 ott 2018, alle ore 21:26, Jens Axboe <axboe@xxxxxxxxx> ha scritto:
> 
> On 10/15/18 12:26 PM, Paolo Valente wrote:
>> 
>> 
>>> Il giorno 15 ott 2018, alle ore 17:39, Jens Axboe <axboe@xxxxxxxxx> ha scritto:
>>> 
>>> On 10/15/18 8:10 AM, Linus Walleij wrote:
>>>> This sets BFQ as the default scheduler for single queue
>>>> block devices (nr_hw_queues == 1) if it is available. This
>>>> affects notably MMC/SD-cards but also UBI and the loopback
>>>> device.
>>>> 
>>>> I have been running it for a while without any negative
>>>> effects on my pet systems and I want some wider testing
>>>> so let's throw it out there and see what people say.
>>>> Admittedly my use cases are limited. I need to keep this
>>>> patch around for my personal needs anyway.
>>>> 
>>>> We take special care to avoid using BFQ on zoned devices
>>>> (in particular SMR, shingled magnetic recording devices)
>>>> as these currently require mq-deadline to group writes
>>>> together.
>>>> 
>>>> I have opted against introducing any default scheduler
>>>> through Kconfig as the mq-deadline enforcement for
>>>> zoned devices has to be done at runtime anyways and
>>>> too many config options will make things confusing.
>>>> 
>>>> My argument for setting a default policy in the kernel
>>>> as opposed to user space is the "reasonable defaults"
>>>> type, analogous to how we have one default CPU scheduling
>>>> policy (CFS) that make most sense for most tasks, and
>>>> how automatic process group scheduling happens in most
>>>> distributions without userspace involvement. The BFQ
>>>> scheduling policy makes most sense for single hardware
>>>> queue devices and many embedded systems will not have
>>>> the clever userspace tools (such as udev) to make an
>>>> educated choice of scheduling policy. Defaults should be
>>>> those that make most sense for the hardware.
>>> 
>>> I still don't like this. There are going to be tons of
>>> cases where the single queue device is some hw raid setup
>>> or similar, where performance is going to be much worse with
>>> BFQ than it is with mq-deadline, for instance. That's just
>>> one case.
>>> 
>> 
>> Hi Jens,
>> in my RAID tests bfq performed as well as in non-RAID tests.  Probably
>> you refer to the fact that, in a RAID configuration, IOPS can become
>> very high.  But, if that is the case, then the response to your
>> objections already emerged in the previous thread.  Let me sum it up
>> again.
>> 
>> I tested bfq on virtually every device in the range from few hundred
>> of IOPS to 50-100KIOPS.  Then, through the public script I already
>> mentioned, I found the maximum number of IOPS that bfq can handle:
>> about 400K with a commodity CPU.
>> 
>> In particular, in all my tests with real hardware, bfq
>> - is not even comparable to that of any of the other scheduler, in
>>  terms of responsiveness, latency for real-time applications, ability
>>  to provide strong bandwidth guarantees, ability to boost throughput
>>  while guaranteeing bandwidths;
>> - is a little worse than the other scheduler for only one test, on
>>  only some hardware: total throughput with random reads, were it may
>>  lose up to 10-15% of throughput.  Of course, the scheduler that reach
>>  a higher throughput leave the machine unusable during the test.
>> 
>> So I really cannot see a reason why bfq could do worse than any of
>> these other schedulers for some single-queue device (conservatively)
>> below 300KIOPS.
>> 
>> Finally, since, AFAICT, single-queue devices doing 400+ KIOPS are
>> probably less than 1% of all the single-queue storage around (USB
>> drives, HDDs, eMMC, standard SSDs, ...), by sticking to mq-deadline we
>> are sacrificing 99% of the hardware, to help 1% of the hardware, for
>> one kind of test cases.
> 
> I should have been more clear - I'm not worried about IOPS overhead,
> I'm worried about scheduling decisions that lower performance on
> (for instance) raid composed of many drives (rotational or otherwise).
> 
> If you have actual data (on what hardware, and what kind of tests)
> to disprove that worry, then that's great, and I'd love to see that.
> 

Here are some old results with a very simple configuration:
http://algo.ing.unimo.it/people/paolo/disk_sched/old-results/4.4.0-v7r11/
http://algo.ing.unimo.it/people/paolo/disk_sched/old-results/3.14.0-v7r3/
http://algo.ing.unimo.it/people/paolo/disk_sched/old-results/3.13.0-v7r2/

Then I stopped repeating tests that always yielded the same good results.

As for more professional systems, a well-known company doing
real-time packet-traffic dumping asked me to modify bfq so as to
guarantee lossless data writing also during queries.  The involved box
had a RAID reaching a few Gbps, and everything worked well.

Anyway, if you have specific issues in mind, I can check more deeply.

Thanks,
Paolo

> 
> -- 
> Jens Axboe





[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux