On Thu, Sep 20, 2018 at 03:00:42PM +0530, Manish Narani wrote:
> Add documentation for MIO bank required property and Tap Delays optional
> properties in devicetree bindings.
>
> Signed-off-by: Manish Narani <manish.narani@xxxxxxxxxx>
> ---
> .../devicetree/bindings/mmc/arasan,sdhci.txt | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
> index 72769e0..6cc95fa 100644
> --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
> +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
> @@ -27,6 +27,7 @@ Required Properties for "arasan,sdhci-5.1":
>
> Required Properties for "xlnx,zynqmp-8.9a":
> - xlnx,device_id: SD controller device ID. Must be either <0> or <1>.
> + - xlnx,mio-bank: The value will be 0/1/2 depending on MIO bank selection.
>
> Optional Properties:
> - arasan,soc-ctl-syscon: A phandle to a syscon device (see ../mfd/syscon.txt)
> @@ -44,6 +45,24 @@ Optional Properties:
> - xlnx,int-clock-stable-broken: when present, the controller always reports
> that the internal clock is stable even when it is not.
>
> +Optional Properties for "xlnx,zynqmp-8.9a":
> + - xlnx,itap-delay-sd-hsd: Input Tap Delay for SD HS.
> + - xlnx,itap-delay-sdr25: Input Tap Delay for SDR25.
> + - xlnx,itap-delay-sdr50: Input Tap Delay for SDR50.
> + - xlnx,itap-delay-sdr104: Input Tap Delay for SDR104.
> + - xlnx,itap-delay-sd-ddr50: Input Tap Delay for SD DDR50.
> + - xlnx,itap-delay-mmc-hsd: Input Tap Delay for MMC HS.
> + - xlnx,itap-delay-mmc-ddr52: Input Tap Delay for MMC DDR52.
> + - xlnx,itap-delay-mmc-hs200: Input Tap Delay for MMC HS200.
> + - xlnx,otap-delay-sd-hsd: Output Tap Delay for SD HS.
> + - xlnx,otap-delay-sdr25: Output Tap Delay for SDR25.
> + - xlnx,otap-delay-sdr50: Output Tap Delay for SDR50.
> + - xlnx,otap-delay-sdr104: Output Tap Delay for SDR104.
> + - xlnx,otap-delay-sd-ddr50: Output Tap Delay for DDR50.
> + - xlnx,otap-delay-mmc-hsd: Output Tap Delay for MMC HS.
> + - xlnx,otap-delay-mmc-ddr52: Output Tap Delay for MMC DDR52.
> + - xlnx,otap-delay-mmc-hs200: Output Tap Delay for MMC HS200.
type, values, units for all of these?
Perhaps combine to pairs of values for input and output delays?
> +
> Example:
> sdhci@e0100000 {
> compatible = "arasan,sdhci-8.9a";
> --
> 2.1.1
>
