From: Ludovic Barre <ludovic.barre@xxxxxx>
All variants don't pretend to have a startbiterr.
-While data error check, if status register return an error
(like MCI_DATACRCFAIL) we must avoid to check MCI_STARTBITERR
(if not desired).
-expand start_err to MCI_IRQENABLE to avoid to set this bit by default.
Signed-off-by: Ludovic Barre <ludovic.barre@xxxxxx>
---
drivers/mmc/host/mmci.c | 27 ++++++++++++++++-----------
drivers/mmc/host/mmci.h | 6 +++---
2 files changed, 19 insertions(+), 14 deletions(-)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index e2272c7..53f613f 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1014,14 +1014,18 @@ static void
mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
unsigned int status)
{
+ unsigned int status_err;
+
/* Make sure we have data to handle */
if (!data)
return;
/* First check for errors */
- if (status & (MCI_DATACRCFAIL | MCI_DATATIMEOUT |
- host->variant->start_err |
- MCI_TXUNDERRUN | MCI_RXOVERRUN)) {
+ status_err = status & (host->variant->start_err |
+ MCI_DATACRCFAIL | MCI_DATATIMEOUT |
+ MCI_TXUNDERRUN | MCI_RXOVERRUN);
+
+ if (status_err) {
u32 remain, success;
/* Terminate the DMA transfer */
@@ -1038,18 +1042,18 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
success = data->blksz * data->blocks - remain;
dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ, status 0x%08x at 0x%08x\n",
- status, success);
- if (status & MCI_DATACRCFAIL) {
+ status_err, success);
+ if (status_err & MCI_DATACRCFAIL) {
/* Last block was not successful */
success -= 1;
data->error = -EILSEQ;
- } else if (status & MCI_DATATIMEOUT) {
+ } else if (status_err & MCI_DATATIMEOUT) {
data->error = -ETIMEDOUT;
- } else if (status & MCI_STARTBITERR) {
+ } else if (status_err & MCI_STARTBITERR) {
data->error = -ECOMM;
- } else if (status & MCI_TXUNDERRUN) {
+ } else if (status_err & MCI_TXUNDERRUN) {
data->error = -EIO;
- } else if (status & MCI_RXOVERRUN) {
+ } else if (status_err & MCI_RXOVERRUN) {
if (success > host->variant->fifosize)
success -= host->variant->fifosize;
else
@@ -1911,7 +1915,7 @@ static int mmci_probe(struct amba_device *dev,
goto clk_disable;
}
- writel(MCI_IRQENABLE, host->base + MMCIMASK0);
+ writel(MCI_IRQENABLE | variant->start_err, host->base + MMCIMASK0);
amba_set_drvdata(dev, mmc);
@@ -2000,7 +2004,8 @@ static void mmci_restore(struct mmci_host *host)
writel(host->datactrl_reg, host->base + MMCIDATACTRL);
writel(host->pwr_reg, host->base + MMCIPOWER);
}
- writel(MCI_IRQENABLE, host->base + MMCIMASK0);
+ writel(MCI_IRQENABLE | host->variant->start_err,
+ host->base + MMCIMASK0);
mmci_reg_delay(host);
spin_unlock_irqrestore(&host->lock, flags);
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 46c8862..fcb332d 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -181,9 +181,9 @@
#define MMCIFIFO 0x080 /* to 0x0bc */
#define MCI_IRQENABLE \
- (MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK| \
- MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \
- MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_STARTBITERRMASK)
+ (MCI_CMDCRCFAILMASK | MCI_DATACRCFAILMASK | MCI_CMDTIMEOUTMASK | \
+ MCI_DATATIMEOUTMASK | MCI_TXUNDERRUNMASK | MCI_RXOVERRUNMASK | \
+ MCI_CMDRESPENDMASK | MCI_CMDSENTMASK)
/* These interrupts are directed to IRQ1 when two IRQ lines are available */
#define MCI_IRQ1MASK \
--
2.7.4
