>From the SD host controller version 4.0 on, SDHCI implementation either is version 3 compatible or version 4 mode. This patch-set covers those changes which are common for SDHCI 4.0 version, regardless of whether they are used with SD or eMMC storage devices. This patchset also added a new sdhci driver for Spreadtrum's controller which supports v4.0 mode. This patchset has been tested on Spreadtrum's mobile phone, emmc can be initialized, mounted, read and written, with these changes for common sdhci framework and sdhci-sprd driver. Changes from V7: - Added Adrian's acked-by on patch 1-6; - Addressed comments. Previous patch series: v7: https://lkml.org/lkml/2018/8/29/130 v6: http://lkml.org/lkml/2018/8/24/205 v5: https://lkml.org/lkml/2018/8/16/122 v4: https://lkml.org/lkml/2018/7/23/269 v3: https://lkml.org/lkml/2018/7/8/239 v2: https://lkml.org/lkml/2018/6/14/936 v1: https://lkml.org/lkml/2018/6/8/108 Chunyan Zhang (9): mmc: sdhci: Add version V4 definition mmc: sdhci: Add sd host v4 mode mmc: sdhci: Change SDMA address register for v4 mode mmc: sdhci: Add ADMA2 64-bit addressing support for V4 mode mmc: sdhci: Add 32-bit block count support for v4 mode mmc: sdhci: Add Auto CMD Auto Select support mmc: sdhci: SDMA may use Auto-CMD23 in v4 mode mmc: sdhci-sprd: Add Spreadtrum's initial host controller dt-bindings: sdhci-sprd: Add bindings for the sdhci-sprd controller .../devicetree/bindings/mmc/sdhci-sprd.txt | 41 ++ drivers/mmc/host/Kconfig | 13 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sdhci-sprd.c | 498 +++++++++++++++++++++ drivers/mmc/host/sdhci.c | 223 +++++++-- drivers/mmc/host/sdhci.h | 28 +- 6 files changed, 754 insertions(+), 50 deletions(-) create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-sprd.txt create mode 100644 drivers/mmc/host/sdhci-sprd.c -- 2.7.4
