For SD host controller version 4.00 or later ones, there're two modes of implementation - Version 3.00 compatible mode or Version 4 mode. This patch introduced an interface to enable v4 mode. Signed-off-by: Chunyan Zhang <zhang.chunyan@xxxxxxxxxx> --- drivers/mmc/host/sdhci.c | 29 +++++++++++++++++++++++++++++ drivers/mmc/host/sdhci.h | 3 +++ 2 files changed, 32 insertions(+) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 01bf88c..0c61105 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -123,6 +123,29 @@ EXPORT_SYMBOL_GPL(sdhci_dumpregs); * * \*****************************************************************************/ +static void sdhci_do_enable_v4_mode(struct sdhci_host *host) +{ + u16 ctrl2; + + ctrl2 = sdhci_readb(host, SDHCI_HOST_CONTROL2); + if (ctrl2 & SDHCI_CTRL_V4_MODE) + return; + + ctrl2 |= SDHCI_CTRL_V4_MODE; + sdhci_writeb(host, ctrl2, SDHCI_HOST_CONTROL); +} + +/* + * This can be called before sdhci_add_host() by Vendor's host controller + * driver to enable v4 mode if supported. + */ +void sdhci_enable_v4_mode(struct sdhci_host *host) +{ + host->v4_mode = true; + sdhci_do_enable_v4_mode(host); +} +EXPORT_SYMBOL_GPL(sdhci_enable_v4_mode); + static inline bool sdhci_data_line_cmd(struct mmc_command *cmd) { return cmd->data || cmd->flags & MMC_RSP_BUSY; @@ -252,6 +275,9 @@ static void sdhci_init(struct sdhci_host *host, int soft) else sdhci_do_reset(host, SDHCI_RESET_ALL); + if (host->v4_mode) + sdhci_do_enable_v4_mode(host); + sdhci_set_default_irqs(host); host->cqe_on = false; @@ -3378,6 +3404,9 @@ void __sdhci_read_caps(struct sdhci_host *host, u16 *ver, u32 *caps, u32 *caps1) sdhci_do_reset(host, SDHCI_RESET_ALL); + if (host->v4_mode) + sdhci_do_enable_v4_mode(host); + of_property_read_u64(mmc_dev(host->mmc)->of_node, "sdhci-caps-mask", &dt_caps_mask); of_property_read_u64(mmc_dev(host->mmc)->of_node, diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index dbd48a8..61611e3 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -184,6 +184,7 @@ #define SDHCI_CTRL_DRV_TYPE_D 0x0030 #define SDHCI_CTRL_EXEC_TUNING 0x0040 #define SDHCI_CTRL_TUNED_CLK 0x0080 +#define SDHCI_CTRL_V4_MODE 0x1000 #define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000 #define SDHCI_CAPABILITIES 0x40 @@ -504,6 +505,7 @@ struct sdhci_host { bool preset_enabled; /* Preset is enabled */ bool pending_reset; /* Cmd/data reset is pending */ bool irq_wake_enabled; /* IRQ wakeup is enabled */ + bool v4_mode; /* Host Version 4 Enable */ struct mmc_request *mrqs_done[SDHCI_MAX_MRQS]; /* Requests done */ struct mmc_command *cmd; /* Current command */ @@ -752,6 +754,7 @@ bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error, int *data_error); void sdhci_dumpregs(struct sdhci_host *host); +void sdhci_enable_v4_mode(struct sdhci_host *host); void sdhci_start_tuning(struct sdhci_host *host); void sdhci_end_tuning(struct sdhci_host *host); -- 2.7.4