<6>[ 161.997610] Freezing user space processes ... (elapsed 0.001 seconds) done. <6>[ 161.999338] OOM killer disabled. <6>[ 161.999398] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. <6>[ 162.000820] Suspending console(s) (use no_console_suspend to debug) <6>[ 162.001264] rt5640 i2c-10EC5640:00: disabling jack detect before suspend <6>[ 162.016990] android_work: did not send uevent (0 0 (null)) <6>[ 162.018206] serial 00:02: disabled <7>[ 162.018245] rtc_cmos 00:00: suspend, alarm may wake, ctrl 22 <5>[ 162.023160] sd 0:0:0:0: [sda] Synchronizing SCSI cache <4>[ 164.440277] mmc0: error -110 during resume (card was removed?) <3>[ 164.440587] dpm_run_callback(): rtw_sdio_resume+0x0/0x70 [r8723bs] returns -1 <3>[ 164.440607] PM: Device mmc0:0001:1 failed to resume async: error -1 <3>[ 164.491335] rtc_cmos 00:00: Could not get RTC status <7>[ 164.491351] rtc_cmos 00:00: resume, ctrl 22 <3>[ 164.548230] dwc3 dwc3.3.auto: failed to enable ep0out <6>[ 164.818687] rt5640 i2c-10EC5640:00: re-enabling jack detect after resume <6>[ 164.819958] rt5640 i2c-10EC5640:00: irq status 0x110 <6>[ 164.847715] OOM killer enabled. <6>[ 164.847770] Restarting tasks ... done. <6>[ 164.852076] PM: suspend exit <3>[ 166.266787] mmc2: card never left busy state <3>[ 166.266864] mmc2: error -110 doing runtime resume <6>[ 166.268370] mmc2: card 59b4 removed <3>[ 166.415248] mmc1: error -110 doing runtime resume <3>[ 167.724788] mmc2: card never left busy state <3>[ 167.733567] mmc2: error -110 whilst initialising SD card <3>[ 171.928786] mmc2: card never left busy state <3>[ 171.928862] mmc2: error -110 whilst initialising SD card <3>[ 176.673780] mmc1: Timeout waiting for hardware interrupt. <3>[ 176.673871] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== <3>[ 176.673958] mmc1: sdhci: Sys addr: 0x00000020 | Version: 0x00001002 <3>[ 176.674043] mmc1: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000020 <3>[ 176.674127] mmc1: sdhci: Argument: 0x0703d270 | Trn mode: 0x0000002b <3>[ 176.674210] mmc1: sdhci: Present: 0x1fff0001 | Host ctl: 0x00000011 <3>[ 176.674294] mmc1: sdhci: Power: 0x0000000b | Blk gap: 0x00000080 <3>[ 176.674378] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x0000fa07 <3>[ 176.674461] mmc1: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 <3>[ 176.674545] mmc1: sdhci: Int enab: 0x02ff000b | Sig enab: 0x02ff000b <3>[ 176.674629] mmc1: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 <3>[ 176.674712] mmc1: sdhci: Caps: 0x446cc801 | Caps_1: 0x00000807 <3>[ 176.674796] mmc1: sdhci: Cmd: 0x0000193a | Max curr: 0x00000000 <3>[ 176.674880] mmc1: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000 <3>[ 176.674964] mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 <3>[ 176.675047] mmc1: sdhci: Host ctl2: 0x00000000 <3>[ 176.675108] mmc1: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x37072200 <3>[ 176.675190] mmc1: sdhci: ============================================ <3>[ 176.682513] mmcblk1: error -110 requesting status <3>[ 176.684204] mmc1: cache flush error -110 <4>[ 176.689193] mmc1: tried to HW reset card, got error -110 <3>[ 176.689270] mmcblk1: recovery failed! 2018-08-04 13:17 GMT+08:00 youling 257 <youling257@xxxxxxxxx>: > Do you forget sdhci-acpi emmc controler on Intel BYTCR SOCs ? > my BYTCR z3735f have the same problem，and sdhci-acpi s0i3 problem. > please you help me. > https://bugzilla.kernel.org/show_bug.cgi?id=196323 > https://bugzilla.kernel.org/show_bug.cgi?id=200717 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
