Add SDHCI_QUIRK2_TUNE_SKIP_XFERRMODE_REG_PROG to skip programming the
SDHCI_TRANSFER_MODE in sdhci_set_transfer_mode() if tuning command is
being sent.
On Tegra210 and Tegra186 the tuning sequence hangs if the SDHCI
transfer mode register is touched.
Signed-off-by: Aapo Vienamo <avienamo@xxxxxxxxxx>
---
drivers/mmc/host/sdhci.c | 6 ++++++
drivers/mmc/host/sdhci.h | 2 ++
2 files changed, 8 insertions(+)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index a7b5602..04dc443 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1028,6 +1028,12 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
if (data == NULL) {
if (host->quirks2 &
+ SDHCI_QUIRK2_TUNE_SKIP_XFERMODE_REG_PROG &&
+ (cmd->opcode == MMC_SEND_TUNING_BLOCK ||
+ cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200)) {
+ return;
+ }
+ if (host->quirks2 &
SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD) {
sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE);
} else {
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 23966f8..0a99008 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -450,6 +450,8 @@ struct sdhci_host {
* obtainable timeout.
*/
#define SDHCI_QUIRK2_DISABLE_HW_TIMEOUT (1<<17)
+/* Don't clear the SDHCI_TRANSFER_MODE register on tuning commands */
+#define SDHCI_QUIRK2_TUNE_SKIP_XFERMODE_REG_PROG (1<<18)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
