On 31 July 2018 at 18:06, Mark Brown <broonie@xxxxxxxxxx> wrote: > On Tue, Jul 31, 2018 at 08:14:12AM -0700, kernelci.org bot wrote: > > Today's -next fails to boot on a variety of Qualcomm 32 bit platforms: > >> multi_v7_defconfig: >> qcom-apq8064-cm-qs600: >> lab-baylibre-seattle: new failure (last pass: next-20180730) >> qcom-apq8064-ifc6410: >> lab-baylibre-seattle: new failure (last pass: next-20180730) >> >> qcom_defconfig: >> qcom-apq8064-cm-qs600: >> lab-baylibre-seattle: new failure (last pass: next-20180730) > > The logs are all somewhat similar, for example: > > https://storage.kernelci.org/next/master/next-20180731/arm/multi_v7_defconfig/lab-baylibre-seattle/boot-qcom-apq8064-cm-qs600.html > > detects a DMA problem during MMCI initialization: > > [ 2.237566] mmci-pl18x 121c0000.sdcc: mmc2: PL180 manf 51 rev0 at 0x121c0000 irq 32,0 (pio) > [ 2.244790] mmci-pl18x 121c0000.sdcc: DMA channels RX dma2chan1, TX dma2chan2 > [ 2.271722] mmci-pl18x 12400000.sdcc: error during DMA transfer! > [ 2.271757] mmci-pl18x 12400000.sdcc: buggy DMA detected. Taking evasive action. > [ 2.276798] ------------[ cut here ]------------ > [ 2.284185] WARNING: CPU: 0 PID: 0 at ../include/linux/dma-mapping.h:551 bam_free_chan+0x2d8/0x2e0 > [ 2.288772] Modules linked in: > [ 2.297534] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.18.0-rc7-next-20180731 #1 > > then panics: > > [ 2.513796] ------------[ cut here ]------------ > [ 2.518367] kernel BUG at ../mm/vmalloc.c:1608! > [ 2.522968] Internal error: Oops - BUG: 0 [#1] SMP ARM > > trying to release the DMA channel. I've not done any bisection or > anything but I do note 8bb2299d2d0b5cc (mmc: mmci: Add and implement a > ->dma_setup() callback for qcom dml) and some related commits in the MMC > tree. > > More details for each of the failed boots at: > > https://kernelci.org/boot/id/5b6054f559b5144b9396baa9/ > https://kernelci.org/boot/id/5b60551259b5144abb96bab6/ > https://kernelci.org/boot/id/5b6054e259b5144b1e96bab2/ > > including full logs, details of the build and so on. Mark, thanks for reporting. Problem was a simple one liner that should have been added to included in my patch "mmc: mmci: Add and implement a ->dma_setup() callback for qcom dml". The missing oneliner caused mmci to wrongly use dma for the qcom variant. I have amended the patch and published it, it should reach the next tree as of tomorrow. Apologize for the mess it created. Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
