[PATCH V8 2/5] mmc: sdhci: Change O2 Host HS200 mode clock frequency to 200MHz

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



O2 SD Host HS200 mode clock frequency current is 208MHz, should be changed to 200MHz to meet specification.

Signed-off-by: ernest.zhang <ernest.zhang@xxxxxxxxxxxxxx>
---
Change in V8:
	The set base clock code comment has been changed in accordance with
	code change in V7.

Change in V7:
	Change HS200 mode clock frequency from 208MHz to 200MHz to meet
	Specification.

Change in V1~V6:
	N/A
---
 drivers/mmc/host/sdhci-pci-o2micro.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
index ba59db6a126c..9e7bacda4717 100644
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -311,9 +311,9 @@ int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
 
 			/* Check Whether subId is 0x11 or 0x12 */
 			if ((scratch_32 == 0x11) || (scratch_32 == 0x12)) {
-				scratch_32 = 0x2c280000;
+				scratch_32 = 0x25100000;
 
-				/* Set Base Clock to 208MZ */
+				/* Set Base Clock to 200MZ */
 				o2_pci_set_baseclk(chip, scratch_32);
 				ret = pci_read_config_dword(chip->pdev,
 							    O2_SD_FUNC_REG4,
@@ -406,7 +406,7 @@ int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
 					       O2_SD_PLL_SETTING, scratch_32);
 		} else {
 			scratch_32 &= 0x0000FFFF;
-			scratch_32 |= 0x2c280000;
+			scratch_32 |= 0x25100000;
 
 			pci_write_config_dword(chip->pdev,
 					       O2_SD_PLL_SETTING, scratch_32);
--
2.17.1


-----邮件原件-----
发件人: Adrian Hunter <adrian.hunter@xxxxxxxxx> 
发送时间: Friday, July 27, 2018 2:58 PM
收件人: Ernest Zhang(WH) <ernest.zhang@xxxxxxxxxxxxxx>; Ulf Hansson <ulf.hansson@xxxxxxxxxx>; linux-mmc@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
抄送: Chuanjin Pang (WH) <chuanjin.pang@xxxxxxxxxxxxxx>; Mike Li (WH) <mike.li@xxxxxxxxxxxxxx>; Chevron Li (WH) <chevron.li@xxxxxxxxxxxxxx>; Shirley Her (SC) <shirley.her@xxxxxxxxxxxxxx>; Xiaoguang Yu (WH) <xiaoguang.yu@xxxxxxxxxxxxxx>; Bobby Wu (WH) <bobby.wu@xxxxxxxxxxxxxx>
主题: Re: [PATCH V7 2/5] mmc: sdhci: Change O2 Host HS200 mode clock frequency to 200MHz

On 27/07/18 09:49, Ernest Zhang(WH) wrote:
> Hi Adrian,
> 	Do I need re-submit all 5 patches after fix that and change the version to v8?

You can reply to this email with PATCH V8 2/5 that has my Ack and the comment fixed.

> BR
> 
> -----Original Message-----
> From: Adrian Hunter [mailto:adrian.hunter@xxxxxxxxx]
> Sent: 2018年7月25日 15:45
> To: Ernest Zhang(WH); Ulf Hansson; linux-mmc@xxxxxxxxxxxxxxx; 
> linux-kernel@xxxxxxxxxxxxxxx
> Cc: Chuanjin Pang (WH); Mike Li (WH); Chevron Li (WH); Shirley Her 
> (SC); Xiaoguang Yu (WH); Bobby Wu (WH)
> Subject: Re: [PATCH V7 2/5] mmc: sdhci: Change O2 Host HS200 mode 
> clock frequency to 200MHz
> 
> On 16/07/18 09:26, ernest.zhang wrote:
>> O2 SD Host HS200 mode clock frequency current is 208MHz, should be 
>> changed to 200MHz to meet specification.
>>
>> Signed-off-by: ernest.zhang <ernest.zhang@xxxxxxxxxxxxxx>
> 
> You left in the misleading comment.  Fix that and add:
> 
> Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
> 
>> ---
>> Change in V7:
>> 	Change HS200 mode clock frequency from 208MHz to 200MHz to meet
>> 	Specification.
>>
>> Change in V1~V6:
>> 	N/A
>> ---
>>  drivers/mmc/host/sdhci-pci-o2micro.c | 4 ++--
>>  1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c
>> b/drivers/mmc/host/sdhci-pci-o2micro.c
>> index ba59db6a126c..94cf3cd75dd3 100644
>> --- a/drivers/mmc/host/sdhci-pci-o2micro.c
>> +++ b/drivers/mmc/host/sdhci-pci-o2micro.c
>> @@ -311,7 +311,7 @@ int sdhci_pci_o2_probe(struct sdhci_pci_chip
>> *chip)
>>  
>>  			/* Check Whether subId is 0x11 or 0x12 */
>>  			if ((scratch_32 == 0x11) || (scratch_32 == 0x12)) {
>> -				scratch_32 = 0x2c280000;
>> +				scratch_32 = 0x25100000;
>>  
>>  				/* Set Base Clock to 208MZ */
> 
> That comment is misleading now.
> 
>>  				o2_pci_set_baseclk(chip, scratch_32); @@ -406,7 +406,7 @@ int 
>> sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
>>  					       O2_SD_PLL_SETTING, scratch_32);
>>  		} else {
>>  			scratch_32 &= 0x0000FFFF;
>> -			scratch_32 |= 0x2c280000;
>> +			scratch_32 |= 0x25100000;
>>  
>>  			pci_write_config_dword(chip->pdev,
>>  					       O2_SD_PLL_SETTING, scratch_32);
>>
> 

��.n��������+%������w��{.n�����{��i��)��jg��������ݢj����G�������j:+v���w�m������w�������h�����٥




[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux