> mmc_select_hs400es() calls mmc_select_bus_width() which will continue
> to set 4bit transfer mode if fail to set 8bit mode. The bus width
> should not be set to 4bit in HS400es.
>
> When fail to set 8bit mode, need return error directly for HS400es.
>
> Signed-off-by: Hongjie Fang <hongjiefang@xxxxxxxxxxxx>
> ---
> drivers/mmc/core/mmc.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index 4466f5d..0dbc512 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -1338,8 +1338,12 @@ static int mmc_select_hs400es(struct mmc_card *card)
> goto out_err;
>
> err = mmc_select_bus_width(card);
> - if (err < 0)
> + if (err != MMC_BUS_WIDTH_8) {
> + pr_err("%s: switch to 8bit bus width failed, err:%d\n",
> + mmc_hostname(host), err);
> + err = -EIO;
> goto out_err;
> + }
>
> /* Switch card to HS mode */
> err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> --
> 1.9.1
Ping.
Any suggestion for it?
B&R
Hongjie
?韬{.n?????%??檩??w?{.n???{炳i?)?骅w* jg????????G??⒏ ⒎?:+v???????? ????＂??????
