[PATCH V1 2/3] Documentation: sdhci-msm: Add entries for passing load values

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The load a particular sdhc controller should request from a regulator
is device specific and hence each device should individually vote for
the required load.

Signed-off-by: Vijay Viswanath <vviswana@xxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/mmc/sdhci-msm.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
index 502b3b8..ee34f28 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
@@ -26,6 +26,11 @@ Required properties:
 	"cal"	- reference clock for RCLK delay calibration (optional)
 	"sleep"	- sleep clock for RCLK delay calibration (optional)
 
+Optional properties:
+- <supply>-current-level - specifies load levels for supply during BUS_ON
+			and BUS_OFF states in power irq. Should be specified in
+			pairs (lpm, hpm), for BUS_OFF and BUS_ON respectively.
+			Units uA.
 Example:
 
 	sdhc_1: sdhci@f9824900 {
@@ -37,6 +42,7 @@ Example:
 
 		vmmc-supply = <&pm8941_l20>;
 		vqmmc-supply = <&pm8941_s3>;
+		vqmmc-current-level = <200 22000>;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>;
-- 
 Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc. 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux