On 16 July 2018 at 13:11, Hongjie Fang <hongjiefang@xxxxxxxxxxxx> wrote:
> mmc_select_hs400es() calls mmc_select_bus_width() which will continue
> to set 4bit transfer mode if fail to set 8bit mode. The bus width
> should not be set to 4bit in HS400es.
>
> When fail to set 8bit mode, need return error directly for HS400es.
>
> Signed-off-by: Hongjie Fang <hongjiefang@xxxxxxxxxxxx>
> ---
> drivers/mmc/core/mmc.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index 4466f5d..b2e1eb6 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -1338,8 +1338,11 @@ static int mmc_select_hs400es(struct mmc_card *card)
> goto out_err;
>
> err = mmc_select_bus_width(card);
> - if (err < 0)
> + if (err != MMC_BUS_WIDTH_8) {
> + pr_err("%s: switch to 8bit bus width failed, err:%d\n",
> + mmc_hostname(host), err);
> goto out_err;
You need to set err to a proper error code, else you may return a
non-error code from the out_err label.
[...]
Kind regards
Uffe
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
