> On 11 July 2018 at 05:00, Hongjie Fang <hongjiefang@xxxxxxxxxxxx> wrote: > > mmc_select_hs400es() calls mmc_select_bus_width() which will continue > > to set 4bit transfer mode if fail to set 8bit mode. The bus width > > should not be set to 4bit in HS400es. > > > > When fail to set 8bit mode, need return error directly for HS400es. > > > > Signed-off-by: Hongjie Fang <hongjiefang@xxxxxxxxxxxx> > > --- > > drivers/mmc/core/mmc.c | 5 ++++- > > 1 file changed, 4 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c > > index 4466f5d..4bd6c09 100644 > > --- a/drivers/mmc/core/mmc.c > > +++ b/drivers/mmc/core/mmc.c > > @@ -1021,8 +1021,11 @@ static int mmc_select_bus_width(struct mmc_card *card) > > EXT_CSD_BUS_WIDTH, > > ext_csd_bits[idx], > > card->ext_csd.generic_cmd6_time); > > - if (err) > > + if (err) { > > + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400ES) > > + return err; > > continue; > > + } > > I would rather let mmc_select_hs400es() check the return code from > mmc_select_bus_width(). > > So, if the return code isn't MMC_BUS_WIDTH_8, mmc_select_hs400es() > should bail out. Yeah, it is better that let mmc_select_hs400es() check the return value. I will update the patch. > > [...] > > Kind regards > Uffe B&R Hongjie ��.n��������+%������w��{.n�����{��i��)��jg��������ݢj����G�������j:+v���w�m������w�������h�����٥