On 12 June 2018 at 15:14, Ludovic Barre <ludovic.Barre@xxxxxx> wrote:
> From: Ludovic Barre <ludovic.barre@xxxxxx>
>
> This patch integrates qcom dml feature into mmci_dma file.
> Qualcomm Data Mover lite/local is already a variant of mmci dmaengine.
>
> Signed-off-by: Ludovic Barre <ludovic.barre@xxxxxx>
> ---
> drivers/mmc/host/Makefile | 1 -
> drivers/mmc/host/mmci.c | 1 -
> drivers/mmc/host/mmci.h | 35 ++++++++
> drivers/mmc/host/mmci_dma.c | 135 ++++++++++++++++++++++++++++-
> drivers/mmc/host/mmci_qcom_dml.c | 177 ---------------------------------------
> drivers/mmc/host/mmci_qcom_dml.h | 31 -------
> 6 files changed, 169 insertions(+), 211 deletions(-)
> delete mode 100644 drivers/mmc/host/mmci_qcom_dml.c
> delete mode 100644 drivers/mmc/host/mmci_qcom_dml.h
No, this is not the way to go. Instead I I think there are two options.
1) Keep mmci_qcom_dml.c|h and thus add new files for the stm32 dma variant.
2) Start by renaming mmci_qcom_dml.* to mmc_dma.* and then in the next
step add the code for stm32 dma into the renamed files.
I guess if there is some overlap in functionality, 2) may be best as
it could easier avoid open coding. However, I am fine with whatever
option and I expect that you knows what is best.
Kind regards
Uffe
>
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index daecaa98..608a020 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -5,7 +5,6 @@
>
> obj-$(CONFIG_MMC_ARMMMCI) += armmmci.o
> armmmci-y := mmci.o mmci_dma.o
> -armmmci-$(CONFIG_MMC_QCOM_DML) += mmci_qcom_dml.o
> obj-$(CONFIG_MMC_PXA) += pxamci.o
> obj-$(CONFIG_MMC_MXC) += mxcmmc.o
> obj-$(CONFIG_MMC_MXS) += mxs-mmc.o
> diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
> index 8868be0..7a15afd 100644
> --- a/drivers/mmc/host/mmci.c
> +++ b/drivers/mmc/host/mmci.c
> @@ -43,7 +43,6 @@
>
> #include "mmci.h"
> #include "mmci_dma.h"
> -#include "mmci_qcom_dml.h"
>
> #define DRIVER_NAME "mmci-pl18x"
>
> diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
> index a73bb98..f7cba35 100644
> --- a/drivers/mmc/host/mmci.h
> +++ b/drivers/mmc/host/mmci.h
> @@ -194,6 +194,41 @@
>
> #define MMCI_PINCTRL_STATE_OPENDRAIN "opendrain"
>
> +/* QCOM DML Registers */
> +#define DML_CONFIG 0x00
> +#define PRODUCER_CRCI_MSK GENMASK(1, 0)
> +#define PRODUCER_CRCI_DISABLE 0
> +#define PRODUCER_CRCI_X_SEL BIT(0)
> +#define PRODUCER_CRCI_Y_SEL BIT(1)
> +#define CONSUMER_CRCI_MSK GENMASK(3, 2)
> +#define CONSUMER_CRCI_DISABLE 0
> +#define CONSUMER_CRCI_X_SEL BIT(2)
> +#define CONSUMER_CRCI_Y_SEL BIT(3)
> +#define PRODUCER_TRANS_END_EN BIT(4)
> +#define BYPASS BIT(16)
> +#define DIRECT_MODE BIT(17)
> +#define INFINITE_CONS_TRANS BIT(18)
> +
> +#define DML_SW_RESET 0x08
> +#define DML_PRODUCER_START 0x0c
> +#define DML_CONSUMER_START 0x10
> +#define DML_PRODUCER_PIPE_LOGICAL_SIZE 0x14
> +#define DML_CONSUMER_PIPE_LOGICAL_SIZE 0x18
> +#define DML_PIPE_ID 0x1c
> +#define PRODUCER_PIPE_ID_SHFT 0
> +#define PRODUCER_PIPE_ID_MSK GENMASK(4, 0)
> +#define CONSUMER_PIPE_ID_SHFT 16
> +#define CONSUMER_PIPE_ID_MSK GENMASK(20, 16)
> +
> +#define DML_PRODUCER_BAM_BLOCK_SIZE 0x24
> +#define DML_PRODUCER_BAM_TRANS_SIZE 0x28
> +
> +/* other definitions */
> +#define PRODUCER_PIPE_LOGICAL_SIZE 4096
> +#define CONSUMER_PIPE_LOGICAL_SIZE 4096
> +
> +#define DML_OFFSET 0x800
> +
> struct clk;
> struct dma_chan;
>
> diff --git a/drivers/mmc/host/mmci_dma.c b/drivers/mmc/host/mmci_dma.c
> index 98a542d..dd7dae5 100644
> --- a/drivers/mmc/host/mmci_dma.c
> +++ b/drivers/mmc/host/mmci_dma.c
> @@ -8,11 +8,11 @@
> #include <linux/dmaengine.h>
> #include <linux/mmc/host.h>
> #include <linux/mmc/card.h>
> +#include <linux/of.h>
> #include <linux/scatterlist.h>
>
> #include "mmci.h"
> #include "mmci_dma.h"
> -#include "mmci_qcom_dml.h"
>
> int mmci_dma_setup(struct mmci_host *host)
> {
> @@ -101,6 +101,139 @@ struct dmaengine_priv {
>
> #define dma_inprogress(dmae) ((dmae)->dma_in_progress)
>
> +#ifdef CONFIG_MMC_QCOM_DML
> +void dml_start_xfer(struct mmci_host *host, struct mmc_data *data)
> +{
> + u32 config;
> + void __iomem *base = host->base + DML_OFFSET;
> +
> + if (data->flags & MMC_DATA_READ) {
> + /* Read operation: configure DML for producer operation */
> + /* Set producer CRCI-x and disable consumer CRCI */
> + config = readl_relaxed(base + DML_CONFIG);
> + config = (config & ~PRODUCER_CRCI_MSK) | PRODUCER_CRCI_X_SEL;
> + config = (config & ~CONSUMER_CRCI_MSK) | CONSUMER_CRCI_DISABLE;
> + writel_relaxed(config, base + DML_CONFIG);
> +
> + /* Set the Producer BAM block size */
> + writel_relaxed(data->blksz, base + DML_PRODUCER_BAM_BLOCK_SIZE);
> +
> + /* Set Producer BAM Transaction size */
> + writel_relaxed(data->blocks * data->blksz,
> + base + DML_PRODUCER_BAM_TRANS_SIZE);
> + /* Set Producer Transaction End bit */
> + config = readl_relaxed(base + DML_CONFIG);
> + config |= PRODUCER_TRANS_END_EN;
> + writel_relaxed(config, base + DML_CONFIG);
> + /* Trigger producer */
> + writel_relaxed(1, base + DML_PRODUCER_START);
> + } else {
> + /* Write operation: configure DML for consumer operation */
> + /* Set consumer CRCI-x and disable producer CRCI*/
> + config = readl_relaxed(base + DML_CONFIG);
> + config = (config & ~CONSUMER_CRCI_MSK) | CONSUMER_CRCI_X_SEL;
> + config = (config & ~PRODUCER_CRCI_MSK) | PRODUCER_CRCI_DISABLE;
> + writel_relaxed(config, base + DML_CONFIG);
> + /* Clear Producer Transaction End bit */
> + config = readl_relaxed(base + DML_CONFIG);
> + config &= ~PRODUCER_TRANS_END_EN;
> + writel_relaxed(config, base + DML_CONFIG);
> + /* Trigger consumer */
> + writel_relaxed(1, base + DML_CONSUMER_START);
> + }
> +
> + /* make sure the dml is configured before dma is triggered */
> + wmb();
> +}
> +
> +static int of_get_dml_pipe_index(struct device_node *np, const char *name)
> +{
> + int index;
> + struct of_phandle_args dma_spec;
> +
> + index = of_property_match_string(np, "dma-names", name);
> +
> + if (index < 0)
> + return -ENODEV;
> +
> + if (of_parse_phandle_with_args(np, "dmas", "#dma-cells", index,
> + &dma_spec))
> + return -ENODEV;
> +
> + if (dma_spec.args_count)
> + return dma_spec.args[0];
> +
> + return -ENODEV;
> +}
> +
> +/* Initialize the dml hardware connected to SD Card controller */
> +int dml_hw_init(struct mmci_host *host, struct device_node *np)
> +{
> + u32 config;
> + void __iomem *base;
> + int consumer_id, producer_id;
> +
> + consumer_id = of_get_dml_pipe_index(np, "tx");
> + producer_id = of_get_dml_pipe_index(np, "rx");
> +
> + if (producer_id < 0 || consumer_id < 0)
> + return -ENODEV;
> +
> + base = host->base + DML_OFFSET;
> +
> + /* Reset the DML block */
> + writel_relaxed(1, base + DML_SW_RESET);
> +
> + /* Disable the producer and consumer CRCI */
> + config = (PRODUCER_CRCI_DISABLE | CONSUMER_CRCI_DISABLE);
> + /*
> + * Disable the bypass mode. Bypass mode will only be used
> + * if data transfer is to happen in PIO mode and don't
> + * want the BAM interface to connect with SDCC-DML.
> + */
> + config &= ~BYPASS;
> + /*
> + * Disable direct mode as we don't DML to MASTER the AHB bus.
> + * BAM connected with DML should MASTER the AHB bus.
> + */
> + config &= ~DIRECT_MODE;
> + /*
> + * Disable infinite mode transfer as we won't be doing any
> + * infinite size data transfers. All data transfer will be
> + * of finite data size.
> + */
> + config &= ~INFINITE_CONS_TRANS;
> + writel_relaxed(config, base + DML_CONFIG);
> +
> + /*
> + * Initialize the logical BAM pipe size for producer
> + * and consumer.
> + */
> + writel_relaxed(PRODUCER_PIPE_LOGICAL_SIZE,
> + base + DML_PRODUCER_PIPE_LOGICAL_SIZE);
> + writel_relaxed(CONSUMER_PIPE_LOGICAL_SIZE,
> + base + DML_CONSUMER_PIPE_LOGICAL_SIZE);
> +
> + /* Initialize Producer/consumer pipe id */
> + writel_relaxed(producer_id | (consumer_id << CONSUMER_PIPE_ID_SHFT),
> + base + DML_PIPE_ID);
> +
> + /* Make sure dml initialization is finished */
> + mb();
> +
> + return 0;
> +}
> +#else
> +static inline int dml_hw_init(struct mmci_host *host, struct device_node *np)
> +{
> + return -EINVAL;
> +}
> +
> +static inline void dml_start_xfer(struct mmci_host *host, struct mmc_data *data)
> +{
> +}
> +#endif /* CONFIG_MMC_QCOM_DML */
> +
> static int dmaengine_setup(struct mmci_host *host)
> {
> const char *rxname, *txname;
> diff --git a/drivers/mmc/host/mmci_qcom_dml.c b/drivers/mmc/host/mmci_qcom_dml.c
> deleted file mode 100644
> index 00750c9..0000000
> --- a/drivers/mmc/host/mmci_qcom_dml.c
> +++ /dev/null
> @@ -1,177 +0,0 @@
> -/*
> - *
> - * Copyright (c) 2011, The Linux Foundation. All rights reserved.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 and
> - * only version 2 as published by the Free Software Foundation.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - */
> -#include <linux/of.h>
> -#include <linux/of_dma.h>
> -#include <linux/bitops.h>
> -#include <linux/mmc/host.h>
> -#include <linux/mmc/card.h>
> -#include "mmci.h"
> -
> -/* Registers */
> -#define DML_CONFIG 0x00
> -#define PRODUCER_CRCI_MSK GENMASK(1, 0)
> -#define PRODUCER_CRCI_DISABLE 0
> -#define PRODUCER_CRCI_X_SEL BIT(0)
> -#define PRODUCER_CRCI_Y_SEL BIT(1)
> -#define CONSUMER_CRCI_MSK GENMASK(3, 2)
> -#define CONSUMER_CRCI_DISABLE 0
> -#define CONSUMER_CRCI_X_SEL BIT(2)
> -#define CONSUMER_CRCI_Y_SEL BIT(3)
> -#define PRODUCER_TRANS_END_EN BIT(4)
> -#define BYPASS BIT(16)
> -#define DIRECT_MODE BIT(17)
> -#define INFINITE_CONS_TRANS BIT(18)
> -
> -#define DML_SW_RESET 0x08
> -#define DML_PRODUCER_START 0x0c
> -#define DML_CONSUMER_START 0x10
> -#define DML_PRODUCER_PIPE_LOGICAL_SIZE 0x14
> -#define DML_CONSUMER_PIPE_LOGICAL_SIZE 0x18
> -#define DML_PIPE_ID 0x1c
> -#define PRODUCER_PIPE_ID_SHFT 0
> -#define PRODUCER_PIPE_ID_MSK GENMASK(4, 0)
> -#define CONSUMER_PIPE_ID_SHFT 16
> -#define CONSUMER_PIPE_ID_MSK GENMASK(20, 16)
> -
> -#define DML_PRODUCER_BAM_BLOCK_SIZE 0x24
> -#define DML_PRODUCER_BAM_TRANS_SIZE 0x28
> -
> -/* other definitions */
> -#define PRODUCER_PIPE_LOGICAL_SIZE 4096
> -#define CONSUMER_PIPE_LOGICAL_SIZE 4096
> -
> -#define DML_OFFSET 0x800
> -
> -void dml_start_xfer(struct mmci_host *host, struct mmc_data *data)
> -{
> - u32 config;
> - void __iomem *base = host->base + DML_OFFSET;
> -
> - if (data->flags & MMC_DATA_READ) {
> - /* Read operation: configure DML for producer operation */
> - /* Set producer CRCI-x and disable consumer CRCI */
> - config = readl_relaxed(base + DML_CONFIG);
> - config = (config & ~PRODUCER_CRCI_MSK) | PRODUCER_CRCI_X_SEL;
> - config = (config & ~CONSUMER_CRCI_MSK) | CONSUMER_CRCI_DISABLE;
> - writel_relaxed(config, base + DML_CONFIG);
> -
> - /* Set the Producer BAM block size */
> - writel_relaxed(data->blksz, base + DML_PRODUCER_BAM_BLOCK_SIZE);
> -
> - /* Set Producer BAM Transaction size */
> - writel_relaxed(data->blocks * data->blksz,
> - base + DML_PRODUCER_BAM_TRANS_SIZE);
> - /* Set Producer Transaction End bit */
> - config = readl_relaxed(base + DML_CONFIG);
> - config |= PRODUCER_TRANS_END_EN;
> - writel_relaxed(config, base + DML_CONFIG);
> - /* Trigger producer */
> - writel_relaxed(1, base + DML_PRODUCER_START);
> - } else {
> - /* Write operation: configure DML for consumer operation */
> - /* Set consumer CRCI-x and disable producer CRCI*/
> - config = readl_relaxed(base + DML_CONFIG);
> - config = (config & ~CONSUMER_CRCI_MSK) | CONSUMER_CRCI_X_SEL;
> - config = (config & ~PRODUCER_CRCI_MSK) | PRODUCER_CRCI_DISABLE;
> - writel_relaxed(config, base + DML_CONFIG);
> - /* Clear Producer Transaction End bit */
> - config = readl_relaxed(base + DML_CONFIG);
> - config &= ~PRODUCER_TRANS_END_EN;
> - writel_relaxed(config, base + DML_CONFIG);
> - /* Trigger consumer */
> - writel_relaxed(1, base + DML_CONSUMER_START);
> - }
> -
> - /* make sure the dml is configured before dma is triggered */
> - wmb();
> -}
> -
> -static int of_get_dml_pipe_index(struct device_node *np, const char *name)
> -{
> - int index;
> - struct of_phandle_args dma_spec;
> -
> - index = of_property_match_string(np, "dma-names", name);
> -
> - if (index < 0)
> - return -ENODEV;
> -
> - if (of_parse_phandle_with_args(np, "dmas", "#dma-cells", index,
> - &dma_spec))
> - return -ENODEV;
> -
> - if (dma_spec.args_count)
> - return dma_spec.args[0];
> -
> - return -ENODEV;
> -}
> -
> -/* Initialize the dml hardware connected to SD Card controller */
> -int dml_hw_init(struct mmci_host *host, struct device_node *np)
> -{
> - u32 config;
> - void __iomem *base;
> - int consumer_id, producer_id;
> -
> - consumer_id = of_get_dml_pipe_index(np, "tx");
> - producer_id = of_get_dml_pipe_index(np, "rx");
> -
> - if (producer_id < 0 || consumer_id < 0)
> - return -ENODEV;
> -
> - base = host->base + DML_OFFSET;
> -
> - /* Reset the DML block */
> - writel_relaxed(1, base + DML_SW_RESET);
> -
> - /* Disable the producer and consumer CRCI */
> - config = (PRODUCER_CRCI_DISABLE | CONSUMER_CRCI_DISABLE);
> - /*
> - * Disable the bypass mode. Bypass mode will only be used
> - * if data transfer is to happen in PIO mode and don't
> - * want the BAM interface to connect with SDCC-DML.
> - */
> - config &= ~BYPASS;
> - /*
> - * Disable direct mode as we don't DML to MASTER the AHB bus.
> - * BAM connected with DML should MASTER the AHB bus.
> - */
> - config &= ~DIRECT_MODE;
> - /*
> - * Disable infinite mode transfer as we won't be doing any
> - * infinite size data transfers. All data transfer will be
> - * of finite data size.
> - */
> - config &= ~INFINITE_CONS_TRANS;
> - writel_relaxed(config, base + DML_CONFIG);
> -
> - /*
> - * Initialize the logical BAM pipe size for producer
> - * and consumer.
> - */
> - writel_relaxed(PRODUCER_PIPE_LOGICAL_SIZE,
> - base + DML_PRODUCER_PIPE_LOGICAL_SIZE);
> - writel_relaxed(CONSUMER_PIPE_LOGICAL_SIZE,
> - base + DML_CONSUMER_PIPE_LOGICAL_SIZE);
> -
> - /* Initialize Producer/consumer pipe id */
> - writel_relaxed(producer_id | (consumer_id << CONSUMER_PIPE_ID_SHFT),
> - base + DML_PIPE_ID);
> -
> - /* Make sure dml initialization is finished */
> - mb();
> -
> - return 0;
> -}
> diff --git a/drivers/mmc/host/mmci_qcom_dml.h b/drivers/mmc/host/mmci_qcom_dml.h
> deleted file mode 100644
> index 6e405d0..0000000
> --- a/drivers/mmc/host/mmci_qcom_dml.h
> +++ /dev/null
> @@ -1,31 +0,0 @@
> -/*
> - *
> - * Copyright (c) 2011, The Linux Foundation. All rights reserved.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 and
> - * only version 2 as published by the Free Software Foundation.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - */
> -#ifndef __MMC_QCOM_DML_H__
> -#define __MMC_QCOM_DML_H__
> -
> -#ifdef CONFIG_MMC_QCOM_DML
> -int dml_hw_init(struct mmci_host *host, struct device_node *np);
> -void dml_start_xfer(struct mmci_host *host, struct mmc_data *data);
> -#else
> -static inline int dml_hw_init(struct mmci_host *host, struct device_node *np)
> -{
> - return -ENOSYS;
> -}
> -static inline void dml_start_xfer(struct mmci_host *host, struct mmc_data *data)
> -{
> -}
> -#endif /* CONFIG_MMC_QCOM_DML */
> -
> -#endif /* __MMC_QCOM_DML_H__ */
> --
> 2.7.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
