Re: [PATCH V3 6/7] mmc: sdhci-sprd: added Spreadtrum's initial host controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 15 June 2018 at 11:36, Chunyan Zhang <zhang.chunyan@xxxxxxxxxx> wrote:
> From: Chunyan Zhang <chunyan.zhang@xxxxxxxxxxxxxx>
>
> This patch adds the initial support of Secure Digital Host Controller
> Interface compliant controller found in some latest Spreadtrum chipsets.
> This patch has been tested on the version of SPRD-R11 controller.
>
> R11 is a variant based on SD v4.0 specification.
>
> With this driver, R11 mmc can be initialized, can be mounted, read and
> written.
>
> Original-by: Billows Wu <billows.wu@xxxxxxxxxxxxxx>
> Signed-off-by: Chunyan Zhang <chunyan.zhang@xxxxxxxxxxxxxx>

This looks good to me now! However, I am deferring a bit to let Adrian
comment as well.

Kind regards
Uffe

> ---
>
> Changes from V2:
> - Save return value of mmc_of_parse();
> - Add checking for clk_prepare_enable();
> - Use BIT() macro instead.
>
> ---
>  drivers/mmc/host/Kconfig      |  13 ++
>  drivers/mmc/host/Makefile     |   1 +
>  drivers/mmc/host/sdhci-sprd.c | 432 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 446 insertions(+)
>  create mode 100644 drivers/mmc/host/sdhci-sprd.c
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 9589f9c..1b0ee11 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -584,6 +584,19 @@ config MMC_SDRICOH_CS
>           To compile this driver as a module, choose M here: the
>           module will be called sdricoh_cs.
>
> +config MMC_SDHCI_SPRD
> +       tristate "Spreadtrum SDIO host Controller"
> +       depends on ARCH_SPRD
> +       depends on MMC_SDHCI_PLTFM
> +       select MMC_SDHCI_IO_ACCESSORS
> +       help
> +         This selects the SDIO Host Controller in Spreadtrum
> +         SoCs, this driver supports R11(IP version: R11P0).
> +
> +         If you have a controller with this interface, say Y or M here.
> +
> +         If unsure, say N.
> +
>  config MMC_TMIO_CORE
>         tristate
>
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index 6aead24..5835bc4 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -88,6 +88,7 @@ obj-$(CONFIG_MMC_SDHCI_ST)            += sdhci-st.o
>  obj-$(CONFIG_MMC_SDHCI_MICROCHIP_PIC32)        += sdhci-pic32.o
>  obj-$(CONFIG_MMC_SDHCI_BRCMSTB)                += sdhci-brcmstb.o
>  obj-$(CONFIG_MMC_SDHCI_OMAP)           += sdhci-omap.o
> +obj-$(CONFIG_MMC_SDHCI_SPRD)           += sdhci-sprd.o
>  obj-$(CONFIG_MMC_CQHCI)                        += cqhci.o
>
>  ifeq ($(CONFIG_CB710_DEBUG),y)
> diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c
> new file mode 100644
> index 0000000..2b551c2
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-sprd.c
> @@ -0,0 +1,432 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Secure Digital Host Controller
> +//
> +// Copyright (C) 2018 Spreadtrum, Inc.
> +// Author: Chunyan Zhang <chunyan.zhang@xxxxxxxxxxxxxx>
> +
> +#include <linux/delay.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/highmem.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_gpio.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/slab.h>
> +
> +#include "sdhci-pltfm.h"
> +
> +#define SDHCI_SPRD_REG_32_DLL_DLY_OFFSET       0x208
> +#define  SDHCIBSPRD_IT_WR_DLY_INV              BIT(5)
> +#define  SDHCI_SPRD_BIT_CMD_DLY_INV            BIT(13)
> +#define  SDHCI_SPRD_BIT_POSRD_DLY_INV          BIT(21)
> +#define  SDHCI_SPRD_BIT_NEGRD_DLY_INV          BIT(29)
> +
> +#define SDHCI_SPRD_REG_32_BUSY_POSI            0x250
> +#define  SDHCI_SPRD_BIT_OUTR_CLK_AUTO_EN       BIT(25)
> +#define  SDHCI_SPRD_BIT_INNR_CLK_AUTO_EN       BIT(24)
> +
> +#define SDHCI_SPRD_REG_DEBOUNCE                0x28C
> +#define  SDHCI_SPRD_BIT_DLL_BAK                BIT(0)
> +#define  SDHCI_SPRD_BIT_DLL_VAL                BIT(1)
> +
> +#define  SDHCI_SPRD_INT_SIGNAL_MASK    0x1B7F410B
> +
> +/* SDHCI_HOST_CONTROL2 */
> +#define  SDHCI_SPRD_CTRL_HS200         0x0005
> +#define  SDHCI_SPRD_CTRL_HS400         0x0006
> +
> +/* SDHCI_SOFTWARE_RESET */
> +#define  SDHCI_HW_RESET_CARD           0x8 /* For Spreadtrum's design */
> +
> +#define SDHCI_SPRD_MAX_CUR             0xFFFFFF
> +#define SDHCI_SPRD_CLK_MAX_DIV         1023
> +
> +#define SDHCI_SPRD_CLK_DEF_RATE                26000000
> +
> +struct sdhci_sprd_host {
> +       u32 version;
> +       struct clk *clk_sdio;
> +       struct clk *clk_enable;
> +       u32 base_rate;
> +};
> +
> +#define TO_SPRD_HOST(host) sdhci_pltfm_priv(sdhci_priv(host))
> +
> +static void sdhci_sprd_init_config(struct sdhci_host *host)
> +{
> +       u16 val;
> +
> +       /* set 64-bit addressing modes */
> +       val = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> +       val |= SDHCI_CTRL_64BIT_ADDR;
> +       sdhci_writew(host, val, SDHCI_HOST_CONTROL2);
> +
> +       /* set dll backup mode */
> +       val = sdhci_readl(host, SDHCI_SPRD_REG_DEBOUNCE);
> +       val |= SDHCI_SPRD_BIT_DLL_BAK | SDHCI_SPRD_BIT_DLL_VAL;
> +       sdhci_writel(host, val, SDHCI_SPRD_REG_DEBOUNCE);
> +}
> +
> +static inline u32 sdhci_sprd_readl(struct sdhci_host *host, int reg)
> +{
> +       if (unlikely(reg == SDHCI_MAX_CURRENT))
> +               return SDHCI_SPRD_MAX_CUR;
> +
> +       return readl_relaxed(host->ioaddr + reg);
> +}
> +
> +static inline void sdhci_sprd_writel(struct sdhci_host *host, u32 val, int reg)
> +{
> +       /* SDHCI_MAX_CURRENT is reserved on Spreadtrum's platform */
> +       if (unlikely(reg == SDHCI_MAX_CURRENT))
> +               return;
> +
> +       if (unlikely(reg == SDHCI_SIGNAL_ENABLE || reg == SDHCI_INT_ENABLE))
> +               val = val & SDHCI_SPRD_INT_SIGNAL_MASK;
> +
> +       writel_relaxed(val, host->ioaddr + reg);
> +}
> +
> +static inline void sdhci_sprd_writeb(struct sdhci_host *host, u8 val, int reg)
> +{
> +       if (unlikely(reg == SDHCI_SOFTWARE_RESET)) {
> +               if (readb_relaxed(host->ioaddr + reg) & SDHCI_HW_RESET_CARD)
> +                       val |= SDHCI_HW_RESET_CARD;
> +       }
> +
> +       writeb_relaxed(val, host->ioaddr + reg);
> +}
> +
> +static inline void sdhci_sprd_sd_clk_off(struct sdhci_host *host)
> +{
> +       u16 ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> +
> +       ctrl &= ~SDHCI_CLOCK_CARD_EN;
> +       sdhci_writew(host, ctrl, SDHCI_CLOCK_CONTROL);
> +}
> +
> +static inline void
> +sdhci_sprd_set_dll_invert(struct sdhci_host *host, u32 mask, bool en)
> +{
> +       u32 dll_dly_offset;
> +
> +       dll_dly_offset = sdhci_readl(host, SDHCI_SPRD_REG_32_DLL_DLY_OFFSET);
> +       if (en)
> +               dll_dly_offset |= mask;
> +       else
> +               dll_dly_offset &= ~mask;
> +       sdhci_writel(host, dll_dly_offset, SDHCI_SPRD_REG_32_DLL_DLY_OFFSET);
> +}
> +
> +static inline u32 sdhci_sprd_calc_div(u32 base_clk, u32 clk)
> +{
> +       u32 div;
> +
> +       /* select 2x clock source */
> +       if (base_clk <= clk * 2)
> +               return 0;
> +
> +       div = (u32) (base_clk / (clk * 2));
> +
> +       if ((base_clk / div) > (clk * 2))
> +               div++;
> +
> +       if (div > SDHCI_SPRD_CLK_MAX_DIV)
> +               div = SDHCI_SPRD_CLK_MAX_DIV;
> +
> +       if (div % 2)
> +               div = (div + 1) / 2;
> +       else
> +               div = div / 2;
> +
> +       return div;
> +}
> +
> +static inline void _sdhci_sprd_set_clock(struct sdhci_host *host,
> +                                       unsigned int clk)
> +{
> +       struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host);
> +       u32 div, val, mask;
> +
> +       div = sdhci_sprd_calc_div(sprd_host->base_rate, clk);
> +
> +       clk |= ((div & 0x300) >> 2) | ((div & 0xFF) << 8);
> +       sdhci_enable_clk(host, clk);
> +
> +       /* enable auto gate sdhc_enable_auto_gate */
> +       val = sdhci_readl(host, SDHCI_SPRD_REG_32_BUSY_POSI);
> +       mask = SDHCI_SPRD_BIT_OUTR_CLK_AUTO_EN |
> +              SDHCI_SPRD_BIT_INNR_CLK_AUTO_EN;
> +       if (mask != (val & mask)) {
> +               val |= mask;
> +               sdhci_writel(host, val, SDHCI_SPRD_REG_32_BUSY_POSI);
> +       }
> +}
> +
> +static void sdhci_sprd_set_clock(struct sdhci_host *host, unsigned int clock)
> +{
> +       bool en = false;
> +
> +       if (clock == 0) {
> +               sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
> +       } else if (clock != host->clock) {
> +               sdhci_sprd_sd_clk_off(host);
> +               _sdhci_sprd_set_clock(host, clock);
> +
> +               if (clock <= 400000)
> +                       en = true;
> +               sdhci_sprd_set_dll_invert(host, SDHCI_SPRD_BIT_CMD_DLY_INV |
> +                                         SDHCI_SPRD_BIT_POSRD_DLY_INV, en);
> +       } else {
> +               _sdhci_sprd_set_clock(host, clock);
> +       }
> +}
> +
> +static unsigned int sdhci_sprd_get_max_clock(struct sdhci_host *host)
> +{
> +       struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host);
> +
> +       return clk_round_rate(sprd_host->clk_sdio, ULONG_MAX);
> +}
> +
> +static unsigned int sdhci_sprd_get_min_clock(struct sdhci_host *host)
> +{
> +       return 400000;
> +}
> +
> +static void sdhci_sprd_set_uhs_signaling(struct sdhci_host *host,
> +                                        unsigned int timing)
> +{
> +       u16 ctrl_2;
> +
> +       if (timing == host->timing)
> +               return;
> +
> +       ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> +       /* Select Bus Speed Mode for host */
> +       ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
> +       switch (timing) {
> +       case MMC_TIMING_UHS_SDR12:
> +               ctrl_2 = SDHCI_CTRL_UHS_SDR12;
> +               break;
> +       case MMC_TIMING_MMC_HS:
> +       case MMC_TIMING_SD_HS:
> +       case MMC_TIMING_UHS_SDR25:
> +               ctrl_2 = SDHCI_CTRL_UHS_SDR25;
> +               break;
> +       case MMC_TIMING_UHS_SDR50:
> +               ctrl_2 = SDHCI_CTRL_UHS_SDR50;
> +               break;
> +       case MMC_TIMING_UHS_SDR104:
> +               ctrl_2 = SDHCI_CTRL_UHS_SDR104;
> +               break;
> +       case MMC_TIMING_UHS_DDR50:
> +       case MMC_TIMING_MMC_DDR52:
> +               ctrl_2 = SDHCI_CTRL_UHS_DDR50;
> +               break;
> +       case MMC_TIMING_MMC_HS200:
> +               ctrl_2 = SDHCI_SPRD_CTRL_HS200;
> +               break;
> +       case MMC_TIMING_MMC_HS400:
> +               ctrl_2 = SDHCI_SPRD_CTRL_HS400;
> +               break;
> +       default:
> +               break;
> +       }
> +
> +       sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
> +}
> +
> +static void sdhci_sprd_hw_reset(struct sdhci_host *host)
> +{
> +       int val;
> +
> +       /* Note: don't use sdhci_readb/writeb() API here */
> +       val = readb_relaxed(host->ioaddr + SDHCI_SOFTWARE_RESET);
> +       val &= ~SDHCI_HW_RESET_CARD;
> +       writeb_relaxed(val, host->ioaddr + SDHCI_SOFTWARE_RESET);
> +       udelay(10);
> +
> +       val |= SDHCI_HW_RESET_CARD;
> +       writeb_relaxed(val, host->ioaddr + SDHCI_SOFTWARE_RESET);
> +       udelay(300);
> +}
> +
> +static struct sdhci_ops sdhci_sprd_ops = {
> +       .read_l = sdhci_sprd_readl,
> +       .write_l = sdhci_sprd_writel,
> +       .write_b = sdhci_sprd_writeb,
> +       .set_clock = sdhci_sprd_set_clock,
> +       .get_max_clock = sdhci_sprd_get_max_clock,
> +       .get_min_clock = sdhci_sprd_get_min_clock,
> +       .set_bus_width = sdhci_set_bus_width,
> +       .reset = sdhci_reset,
> +       .set_uhs_signaling = sdhci_sprd_set_uhs_signaling,
> +       .hw_reset = sdhci_sprd_hw_reset,
> +};
> +
> +static const struct sdhci_pltfm_data sdhci_sprd_pdata = {
> +       .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK,
> +       .quirks2 = SDHCI_QUIRK2_BROKEN_HS200,
> +       .ops = &sdhci_sprd_ops,
> +};
> +
> +static int sdhci_sprd_probe(struct platform_device *pdev)
> +{
> +       struct sdhci_host *host;
> +       struct sdhci_sprd_host *sprd_host;
> +       struct clk *clk;
> +       int ret = 0;
> +
> +       host = sdhci_pltfm_init(pdev, &sdhci_sprd_pdata, sizeof(*sprd_host));
> +       if (IS_ERR(host))
> +               return PTR_ERR(host);
> +
> +       host->dma_mask = DMA_BIT_MASK(64);
> +       pdev->dev.dma_mask = &host->dma_mask;
> +
> +       host->mmc->caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED |
> +               MMC_CAP_ERASE | MMC_CAP_CMD23;
> +       ret = mmc_of_parse(host->mmc);
> +       if (ret)
> +               goto pltfm_free;
> +
> +       sprd_host = TO_SPRD_HOST(host);
> +
> +       clk = devm_clk_get(&pdev->dev, "sdio");
> +       if (IS_ERR(clk)) {
> +               ret = PTR_ERR(clk);
> +               goto pltfm_free;
> +       }
> +       sprd_host->clk_sdio = clk;
> +       sprd_host->base_rate = clk_get_rate(sprd_host->clk_sdio);
> +       if (!sprd_host->base_rate)
> +               sprd_host->base_rate = SDHCI_SPRD_CLK_DEF_RATE;
> +
> +       clk = devm_clk_get(&pdev->dev, "enable");
> +       if (IS_ERR(clk)) {
> +               ret = PTR_ERR(clk);
> +               goto pltfm_free;
> +       }
> +       sprd_host->clk_enable = clk;
> +
> +       ret = clk_prepare_enable(sprd_host->clk_sdio);
> +       if (ret)
> +               goto pltfm_free;
> +
> +       clk_prepare_enable(sprd_host->clk_enable);
> +       if (ret)
> +               goto clk_disable;
> +
> +       sdhci_sprd_init_config(host);
> +
> +       host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
> +       sprd_host->version = ((host->version & SDHCI_VENDOR_VER_MASK) >>
> +                              SDHCI_VENDOR_VER_SHIFT);
> +
> +       pm_runtime_get_noresume(&pdev->dev);
> +       pm_runtime_set_active(&pdev->dev);
> +       pm_runtime_enable(&pdev->dev);
> +       pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
> +       pm_runtime_use_autosuspend(&pdev->dev);
> +       pm_suspend_ignore_children(&pdev->dev, 1);
> +
> +       ret = sdhci_add_host(host);
> +       if (ret) {
> +               dev_err(&pdev->dev, "failed to add mmc host: %d\n", ret);
> +               goto pm_runtime_disable;
> +       }
> +
> +       pm_runtime_mark_last_busy(&pdev->dev);
> +       pm_runtime_put_autosuspend(&pdev->dev);
> +
> +       return 0;
> +
> +pm_runtime_disable:
> +       pm_runtime_disable(&pdev->dev);
> +       pm_runtime_set_suspended(&pdev->dev);
> +
> +       clk_disable_unprepare(sprd_host->clk_enable);
> +
> +clk_disable:
> +       clk_disable_unprepare(sprd_host->clk_sdio);
> +
> +pltfm_free:
> +       sdhci_pltfm_free(pdev);
> +       return ret;
> +}
> +
> +static int sdhci_sprd_remove(struct platform_device *pdev)
> +{
> +       struct sdhci_host *host = platform_get_drvdata(pdev);
> +       struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host);
> +       struct mmc_host *mmc = host->mmc;
> +
> +       mmc_remove_host(mmc);
> +       clk_disable_unprepare(sprd_host->clk_sdio);
> +       clk_disable_unprepare(sprd_host->clk_enable);
> +
> +       mmc_free_host(mmc);
> +
> +       return 0;
> +}
> +
> +static const struct of_device_id sdhci_sprd_of_match[] = {
> +       { .compatible = "sprd,sdhci-r11", },
> +       { }
> +};
> +MODULE_DEVICE_TABLE(of, sdhci_sprd_of_match);
> +
> +#ifdef CONFIG_PM
> +static int sdhci_sprd_runtime_suspend(struct device *dev)
> +{
> +       struct sdhci_host *host = dev_get_drvdata(dev);
> +       struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host);
> +
> +       sdhci_runtime_suspend_host(host);
> +
> +       clk_disable_unprepare(sprd_host->clk_sdio);
> +       clk_disable_unprepare(sprd_host->clk_enable);
> +
> +       return 0;
> +}
> +
> +static int sdhci_sprd_runtime_resume(struct device *dev)
> +{
> +       struct sdhci_host *host = dev_get_drvdata(dev);
> +       struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host);
> +
> +       clk_prepare_enable(sprd_host->clk_enable);
> +       clk_prepare_enable(sprd_host->clk_sdio);
> +
> +       sdhci_runtime_resume_host(host);
> +
> +       return 0;
> +}
> +#endif
> +
> +static const struct dev_pm_ops sdhci_sprd_pm_ops = {
> +       SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> +                               pm_runtime_force_resume)
> +       SET_RUNTIME_PM_OPS(sdhci_sprd_runtime_suspend,
> +                          sdhci_sprd_runtime_resume, NULL)
> +};
> +
> +static struct platform_driver sdhci_sprd_driver = {
> +       .probe = sdhci_sprd_probe,
> +       .remove = sdhci_sprd_remove,
> +       .driver = {
> +               .name = "sdhci_sprd_r11",
> +               .of_match_table = of_match_ptr(sdhci_sprd_of_match),
> +               .pm = &sdhci_sprd_pm_ops,
> +       },
> +};
> +module_platform_driver(sdhci_sprd_driver);
> +
> +MODULE_DESCRIPTION("Spreadtrum sdio host controller r11 driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:sdhci-sprd-r11");
> --
> 2.7.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux