From: Ludovic Barre <ludovic.barre@xxxxxx>
This patch allows to define specific pio mask for variants.
Needed to support the STM32 sdmmc variant which has some bits
with different meaning (bits: 21,20,13,12,9)
Signed-off-by: Ludovic Barre <ludovic.barre@xxxxxx>
---
drivers/mmc/host/mmci.c | 13 +++++++++++--
drivers/mmc/host/mmci.h | 5 ++++-
2 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 1f44c61..5fd3ffb6 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -62,6 +62,7 @@ static struct variant_data variant_arm = {
.f_max = 100000000,
.reversed_irq_handling = true,
.mmcimask1 = true,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_ROD,
.mmci_dma = &dmaengine,
@@ -80,6 +81,7 @@ static struct variant_data variant_arm_extended_fifo = {
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 100000000,
.mmcimask1 = true,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_ROD,
.mmci_dma = &dmaengine,
@@ -99,6 +101,7 @@ static struct variant_data variant_arm_extended_fifo_hwfc = {
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 100000000,
.mmcimask1 = true,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_ROD,
.mmci_dma = &dmaengine,
@@ -124,6 +127,7 @@ static struct variant_data variant_u300 = {
.pwrreg_clkgate = true,
.pwrreg_nopower = true,
.mmcimask1 = true,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_OD,
.mmci_dma = &dmaengine,
@@ -150,6 +154,7 @@ static struct variant_data variant_nomadik = {
.pwrreg_clkgate = true,
.pwrreg_nopower = true,
.mmcimask1 = true,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_OD,
.mmci_dma = &dmaengine,
@@ -182,6 +187,7 @@ static struct variant_data variant_ux500 = {
.busy_detect_mask = MCI_ST_BUSYENDMASK,
.pwrreg_nopower = true,
.mmcimask1 = true,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_OD,
.mmci_dma = &dmaengine,
@@ -216,6 +222,7 @@ static struct variant_data variant_ux500v2 = {
.busy_detect_mask = MCI_ST_BUSYENDMASK,
.pwrreg_nopower = true,
.mmcimask1 = true,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_OD,
.mmci_dma = &dmaengine,
@@ -232,6 +239,7 @@ static struct variant_data variant_stm32 = {
.cmdreg_lrsp_crc = MCI_CPSM_RESPONSE | MCI_CPSM_LONGRSP,
.cmdreg_srsp_crc = MCI_CPSM_RESPONSE,
.cmdreg_srsp = MCI_CPSM_RESPONSE,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.datalength_bits = 24,
.datactrl_blocksz = 11,
.datactrl_dpsm_enable = MCI_DPSM_ENABLE,
@@ -268,6 +276,7 @@ static struct variant_data variant_qcom = {
.qcom_fifo = true,
.qcom_dml = true,
.mmcimask1 = true,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_ROD,
.mmci_dma = &dmaengine,
@@ -486,7 +495,7 @@ static void mmci_set_mask1(struct mmci_host *host, unsigned int mask)
if (host->singleirq) {
unsigned int mask0 = readl(base + MMCIMASK0);
- mask0 &= ~MCI_IRQ1MASK;
+ mask0 &= ~variant->irq_pio_mask;
mask0 |= mask;
writel(mask0, base + MMCIMASK0);
@@ -1046,7 +1055,7 @@ static irqreturn_t mmci_irq(int irq, void *dev_id)
if (status & host->mask1_reg)
mmci_pio_irq(irq, dev_id);
- status &= ~MCI_IRQ1MASK;
+ status &= ~host->variant->irq_pio_mask;
}
/*
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index a2bf8bc..b91b130 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -186,7 +186,7 @@
MCI_CMDRESPENDMASK | MCI_CMDSENTMASK)
/* These interrupts are directed to IRQ1 when two IRQ lines are available */
-#define MCI_IRQ1MASK \
+#define MCI_IRQ_PIO_MASK \
(MCI_RXFIFOHALFFULLMASK | MCI_RXDATAAVLBLMASK | \
MCI_TXFIFOHALFEMPTYMASK)
@@ -275,6 +275,8 @@ struct mmci_host;
* @qcom_dml: enables qcom specific dma glue for dma transfers.
* @reversed_irq_handling: handle data irq before cmd irq.
* @mmcimask1: true if variant have a MMCIMASK1 register.
+ * @irq_pio_mask: bitmask used to manage interrupt pio transfert in mmcimask
+ * register
* @start_err: bitmask identifying the STARTBITERR bit inside MMCISTATUS
* register.
* @opendrain: bitmask identifying the OPENDRAIN bit inside MMCIPOWER register
@@ -317,6 +319,7 @@ struct variant_data {
bool qcom_dml;
bool reversed_irq_handling;
bool mmcimask1;
+ unsigned int irq_pio_mask;
u32 start_err;
u32 opendrain;
struct mmci_dma_ops *mmci_dma;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
