[PATCH] mmc: dw_mmc: fix card threshold control configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: x00270170 <xiaqing17@xxxxxxxxxxxxx>

Card write threshold control is supposed to be set since controller
version 2.80a for data write in HS400 mode and data read in
HS200/HS400/SDR104 mode. However the current code returns without
configuring it in the case of data writing in HS400 mode.
Meanwhile the patch fixes that the current code goes to
'disable' when doing data reading in HS400 mode.

Signed-off-by: Qing Xia <xiaqing17@xxxxxxxxxxxxx>
---
 drivers/mmc/host/dw_mmc.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 29a1afa..3ee8f57 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1065,8 +1065,8 @@ static void dw_mci_ctrl_thld(struct dw_mci *host, struct mmc_data *data)
 	 * It's used when HS400 mode is enabled.
 	 */
 	if (data->flags & MMC_DATA_WRITE &&
-		!(host->timing != MMC_TIMING_MMC_HS400))
-		return;
+		host->timing != MMC_TIMING_MMC_HS400)
+		goto disable;
 
 	if (data->flags & MMC_DATA_WRITE)
 		enable = SDMMC_CARD_WR_THR_EN;
@@ -1074,7 +1074,8 @@ static void dw_mci_ctrl_thld(struct dw_mci *host, struct mmc_data *data)
 		enable = SDMMC_CARD_RD_THR_EN;
 
 	if (host->timing != MMC_TIMING_MMC_HS200 &&
-	    host->timing != MMC_TIMING_UHS_SDR104)
+	    host->timing != MMC_TIMING_UHS_SDR104 &&
+	    host->timing != MMC_TIMING_MMC_HS400)
 		goto disable;
 
 	blksz_depth = blksz / (1 << host->data_shift);
-- 
2.8.1

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux