On Thu, Apr 19, 2018 at 11:55 PM, Ulf Hansson <ulf.hansson@xxxxxxxxxx> wrote: > On 19 April 2018 at 19:58, Kevin Hilman <khilman@xxxxxxxxxxxx> wrote: >> Yixun Lan <yixun.lan@xxxxxxxxxxx> writes: >> >>> From: Nan Li <nan.li@xxxxxxxxxxx> >>> >>> The IP of eMMC controller in AXG is similiar to Meson-GX series. >>> Here we add the initial support of the HS200 mode with >>> clock running at 166MHz (to be safe), since we found some eMMC chip >>> fail to run at 200MHz due to tunning phase error. >>> >>> Signed-off-by: Nan Li <nan.li@xxxxxxxxxxx> >>> Signed-off-by: Yixun Lan <yixun.lan@xxxxxxxxxxx> >> >> Applied to v4.18/dt64 >> >>> --- >>> Hi Kevin >>> Please note this patch actually depend on the eMMC driver here [0]. >>> Still a few problem to solve, to improve the tuning phase driver to make >>> the clock running at 200MHz, and to further support the HS400 mode. >>> Anyway, this patch itself is quite independent. >> >> The driver changes are queued for v4.18 also. Good! > > Right, may I consider that as an ack? :-) I thought it was already merged while I was OoO, so I didn't bother to reply with an ack, but if it's not too late, then yes: Acked-by: Kevin Hilman <khilman@xxxxxxxxxxxx> Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
