From: Nan Li <nan.li@xxxxxxxxxxx>
Introduce the compatible data to cover the register offset & mask
change of the eMMC controller in Amlogic's Meson-AXG SoC.
Signed-off-by: Nan Li <nan.li@xxxxxxxxxxx>
Signed-off-by: Yixun Lan <yixun.lan@xxxxxxxxxxx>
---
drivers/mmc/host/meson-gx-mmc.c | 61 ++++++++++++++++++++++++++++++++++-------
1 file changed, 51 insertions(+), 10 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 4f972b879fe6..56c90542ac29 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -47,15 +47,29 @@
#define CLK_CORE_PHASE_MASK GENMASK(9, 8)
#define CLK_TX_PHASE_MASK GENMASK(11, 10)
#define CLK_RX_PHASE_MASK GENMASK(13, 12)
-#define CLK_TX_DELAY_MASK GENMASK(19, 16)
-#define CLK_RX_DELAY_MASK GENMASK(23, 20)
+#define CLK_V2_TX_DELAY_MASK GENMASK(19, 16)
+#define CLK_V2_RX_DELAY_MASK GENMASK(23, 20)
+#define CLK_V2_ALWAYS_ON BIT(24)
+
+#define CLK_V3_TX_DELAY_MASK GENMASK(21, 16)
+#define CLK_V3_RX_DELAY_MASK GENMASK(27, 22)
+#define CLK_V3_ALWAYS_ON BIT(28)
+
#define CLK_DELAY_STEP_PS 200
#define CLK_PHASE_STEP 30
#define CLK_PHASE_POINT_NUM (360 / CLK_PHASE_STEP)
-#define CLK_ALWAYS_ON BIT(24)
+
+#define CLK_TX_DELAY_MASK(h) (h->data->tx_delay_mask)
+#define CLK_RX_DELAY_MASK(h) (h->data->rx_delay_mask)
+#define CLK_ALWAYS_ON(h) (h->data->always_on)
#define SD_EMMC_DELAY 0x4
#define SD_EMMC_ADJUST 0x8
+
+#define SD_EMMC_DELAY1 0x4
+#define SD_EMMC_DELAY2 0x8
+#define SD_EMMC_V3_ADJUST 0xc
+
#define SD_EMMC_CALOUT 0x10
#define SD_EMMC_START 0x40
#define START_DESC_INIT BIT(0)
@@ -122,6 +136,12 @@
#define MUX_CLK_NUM_PARENTS 2
+struct meson_mmc_data {
+ unsigned int tx_delay_mask;
+ unsigned int rx_delay_mask;
+ unsigned int always_on;
+};
+
struct sd_emmc_desc {
u32 cmd_cfg;
u32 cmd_arg;
@@ -131,6 +151,7 @@ struct sd_emmc_desc {
struct meson_host {
struct device *dev;
+ struct meson_mmc_data *data;
struct mmc_host *mmc;
struct mmc_command *cmd;
@@ -474,7 +495,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
/* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
clk_reg = 0;
- clk_reg |= CLK_ALWAYS_ON;
+ clk_reg |= CLK_ALWAYS_ON(host);
clk_reg |= CLK_DIV_MASK;
writel(clk_reg, host->regs + SD_EMMC_CLOCK);
@@ -574,7 +595,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
tx->reg = host->regs + SD_EMMC_CLOCK;
tx->phase_mask = CLK_TX_PHASE_MASK;
- tx->delay_mask = CLK_TX_DELAY_MASK;
+ tx->delay_mask = CLK_TX_DELAY_MASK(host);
tx->delay_step_ps = CLK_DELAY_STEP_PS;
tx->hw.init = &init;
@@ -597,7 +618,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
rx->reg = host->regs + SD_EMMC_CLOCK;
rx->phase_mask = CLK_RX_PHASE_MASK;
- rx->delay_mask = CLK_RX_DELAY_MASK;
+ rx->delay_mask = CLK_RX_DELAY_MASK(host);
rx->delay_step_ps = CLK_DELAY_STEP_PS;
rx->hw.init = &init;
@@ -1184,6 +1205,13 @@ static int meson_mmc_probe(struct platform_device *pdev)
goto free_host;
}
+ host->data = (struct meson_mmc_data *)
+ of_device_get_match_data(&pdev->dev);
+ if (!host->data) {
+ ret = -EINVAL;
+ goto free_host;
+ }
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
host->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(host->regs)) {
@@ -1315,11 +1343,24 @@ static int meson_mmc_remove(struct platform_device *pdev)
return 0;
}
+static const struct meson_mmc_data meson_gx_data = {
+ .tx_delay_mask = CLK_V2_TX_DELAY_MASK,
+ .rx_delay_mask = CLK_V2_RX_DELAY_MASK,
+ .always_on = CLK_V2_ALWAYS_ON,
+};
+
+static const struct meson_mmc_data meson_axg_data = {
+ .tx_delay_mask = CLK_V3_TX_DELAY_MASK,
+ .rx_delay_mask = CLK_V3_RX_DELAY_MASK,
+ .always_on = CLK_V3_ALWAYS_ON,
+};
+
static const struct of_device_id meson_mmc_of_match[] = {
- { .compatible = "amlogic,meson-gx-mmc", },
- { .compatible = "amlogic,meson-gxbb-mmc", },
- { .compatible = "amlogic,meson-gxl-mmc", },
- { .compatible = "amlogic,meson-gxm-mmc", },
+ { .compatible = "amlogic,meson-gx-mmc", .data = &meson_gx_data },
+ { .compatible = "amlogic,meson-gxbb-mmc", .data = &meson_gx_data },
+ { .compatible = "amlogic,meson-gxl-mmc", .data = &meson_gx_data },
+ { .compatible = "amlogic,meson-gxm-mmc", .data = &meson_gx_data },
+ { .compatible = "amlogic,meson-axg-mmc", .data = &meson_axg_data },
{}
};
MODULE_DEVICE_TABLE(of, meson_mmc_of_match);
--
2.16.2
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
