From: Kyle Roeschley <kyle.roeschley@xxxxxx> On some NI 904x devices, using 3.3V signaling for extended periods of time will physically damage the pads connected to the SDHC, eventually causing complete failure of the controller. To work around this, require that we use 1.8V signaling. Signed-off-by: Kyle Roeschley <kyle.roeschley@xxxxxx> Signed-off-by: Jennifer Dahm <jennifer.dahm@xxxxxx> --- drivers/mmc/host/sdhci-pci-core.c | 4 ++++ drivers/mmc/host/sdhci-pci.h | 1 + 2 files changed, 5 insertions(+) diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index 787434e..b34482f 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -832,6 +832,10 @@ static int byt_sd_probe_slot(struct sdhci_pci_slot *slot) slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_GLK_SD) slot->host->mmc_host_ops.get_cd = bxt_get_cd; + if (slot->chip->pdev->subsystem_vendor == PCI_VENDOR_ID_NI && + slot->chip->pdev->subsystem_device == PCI_SUBDEVICE_ID_NI_78E3) + slot->host->mmc->caps2 |= MMC_CAP2_REQUIRE_1_8V; + return 0; } diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h index 5cbcdc4..db9cb54 100644 --- a/drivers/mmc/host/sdhci-pci.h +++ b/drivers/mmc/host/sdhci-pci.h @@ -54,6 +54,7 @@ #define PCI_DEVICE_ID_REALTEK_5250 0x5250 #define PCI_SUBDEVICE_ID_NI_7884 0x7884 +#define PCI_SUBDEVICE_ID_NI_78E3 0x78e3 #define PCI_VENDOR_ID_ARASAN 0x16e6 #define PCI_DEVICE_ID_ARASAN_PHY_EMMC 0x0670 -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
