On 07/03/18 15:20, Kishon Vijay Abraham I wrote:
> Add quirk to disable HW timeout if the requested timeout is more than
> the maximum obtainable timeout.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
> ---
> drivers/mmc/host/sdhci.c | 27 +++++++++++++++++++++------
> drivers/mmc/host/sdhci.h | 5 +++++
> 2 files changed, 26 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index aa8b5ca0d1b0..1dd117cbeb6e 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -767,12 +767,6 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
> break;
> }
>
> - if (count >= 0xF) {
> - DBG("Too large timeout 0x%x requested for CMD%d!\n",
> - count, cmd->opcode);
> - count = 0xE;
> - }
> -
> return count;
> }
>
> @@ -790,6 +784,16 @@ static void sdhci_set_transfer_irqs(struct sdhci_host *host)
> sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
> }
>
> +static void sdhci_set_data_timeout_irq(struct sdhci_host *host, bool enable)
> +{
> + if (enable)
> + host->ier |= SDHCI_INT_DATA_TIMEOUT;
> + else
> + host->ier &= ~SDHCI_INT_DATA_TIMEOUT;
> + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
> + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
> +}
> +
> static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
> {
> u8 count;
> @@ -798,6 +802,17 @@ static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
> host->ops->set_timeout(host, cmd);
> } else {
> count = sdhci_calc_timeout(host, cmd);
> + if (count >= 0xF &&
> + host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT)
> + sdhci_set_data_timeout_irq(host, false);
> + else if (!(host->ier & SDHCI_INT_DATA_TIMEOUT))
> + sdhci_set_data_timeout_irq(host, true);
> +
> + if (count >= 0xF) {
> + DBG("Too large timeout 0x%x requested for CMD%d!\n",
> + count, cmd->opcode);
> + count = 0xE;
> + }
> sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
> }
> }
I guess I misunderstood you, but we need to cater for
open-ended busy timeouts (i.e. busy_timeout==0) and broken
timeout (i.e. SDHCI_QUIRK_BROKEN_TIMEOUT_VAL and
SDHCI_QUIRK2_DISABLE_HW_TIMEOUT together mean never use the
HW timeout)
So maybe like this:
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index aa8b5ca0d1b0..a358eb5c5f98 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -709,12 +709,15 @@ static u32 sdhci_sdma_address(struct sdhci_host *host)
return sg_dma_address(host->data->sg);
}
-static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
+static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd,
+ bool *too_big)
{
u8 count;
struct mmc_data *data = cmd->data;
unsigned target_timeout, current_timeout;
+ *too_big = true;
+
/*
* If the host controller provides us with an incorrect timeout
* value, just skip the check and use 0xE. The hardware may take
@@ -768,9 +771,12 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
}
if (count >= 0xF) {
- DBG("Too large timeout 0x%x requested for CMD%d!\n",
- count, cmd->opcode);
+ if (!(host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT))
+ DBG("Too large timeout 0x%x requested for CMD%d!\n",
+ count, cmd->opcode);
count = 0xE;
+ } else {
+ *too_big = false;
}
return count;
@@ -790,6 +796,16 @@ static void sdhci_set_transfer_irqs(struct sdhci_host *host)
sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
}
+static void sdhci_set_data_timeout_irq(struct sdhci_host *host, bool enable)
+{
+ if (enable)
+ host->ier |= SDHCI_INT_DATA_TIMEOUT;
+ else
+ host->ier &= ~SDHCI_INT_DATA_TIMEOUT;
+ sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+ sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+}
+
static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
{
u8 count;
@@ -797,7 +813,17 @@ static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
if (host->ops->set_timeout) {
host->ops->set_timeout(host, cmd);
} else {
- count = sdhci_calc_timeout(host, cmd);
+ bool too_big = false;
+
+ count = sdhci_calc_timeout(host, cmd, &too_big);
+
+ if (too_big &&
+ host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT) {
+ sdhci_set_data_timeout_irq(host, false);
+ } else if (!(host->ier & SDHCI_INT_DATA_TIMEOUT)) {
+ sdhci_set_data_timeout_irq(host, true);
+ }
+
sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
}
}
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index c95b0a4a7594..ff283ee08854 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -437,6 +437,11 @@ struct sdhci_host {
> #define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN (1<<15)
> /* Controller has CRC in 136 bit Command Response */
> #define SDHCI_QUIRK2_RSP_136_HAS_CRC (1<<16)
> +/*
> + * Disable HW timeout if the requested timeout is more than the maximum
> + * obtainable timeout
> + */
> +#define SDHCI_QUIRK2_DISABLE_HW_TIMEOUT (1<<17)
>
> int irq; /* Device IRQ */
> void __iomem *ioaddr; /* Mapped address */
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
