Re: [PATCH 1/5] dt-bindings: mmc: document the stm32 sdmmc bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



hi Rob

Ok for all changes

BR
Ludo

On 02/19/2018 03:47 PM, Rob Herring wrote:
On Thu, Feb 15, 2018 at 02:34:53PM +0100, Ludovic Barre wrote:
From: Ludovic Barre <ludovic.barre@xxxxxx>

Document the binding for stm32 sdmmc controller.

Signed-off-by: Ludovic Barre <ludovic.barre@xxxxxx>
---
  .../devicetree/bindings/mmc/st,stm32-sdmmc.txt     | 35 ++++++++++++++++++++++
  1 file changed, 35 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/mmc/st,stm32-sdmmc.txt

diff --git a/Documentation/devicetree/bindings/mmc/st,stm32-sdmmc.txt b/Documentation/devicetree/bindings/mmc/st,stm32-sdmmc.txt
new file mode 100644
index 0000000..52eb1f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/st,stm32-sdmmc.txt
@@ -0,0 +1,35 @@
+* STMicroelectronics STM32 SDMMC controller
+
+The highspeed MMC host controller on STM32 soc family
+provides an interface for MMC, SD and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the sdmmc driver.
+
+Required properties:
+ - compatible: Should be "st,stm32h7-sdmmc"
+ - reg: mmc controller base registers
+ - interrupts: Should contain the interrupt number
+ - clocks: Should contain phandle for the clock feeding the controller
+ - resets: Should contain phandle for the reset feeding the controller
+
+Optional property:
+- st,dirpol: Allow to select direction polarity of external voltage

This doesn't need to be so terse. Perhaps "st,dir-output-high".


Ok, I take "st,dir-output-high", your're right it's more descriptive :-)

+  transceiver (which manage data and command direction).
+  if set: Voltage transceiver IOs are driven as output when direction signals are high,
+  else: Voltage transceiver IOs are driven as output when direction signals are low.
+- st,negedge: generate data & command on sdmmc clock falling edge

st,neg-edge

+- st,pin-ckin: use sdmmc_ckin pin from an external driver to sample
+  the receive data (example: with voltage switch transceiver).

st,use-ckin


OK

+
+Example:
+	sdmmc1: sdmmc@52007000 {

mmc@...


OK

+		compatible = "st,stm32h7-sdmmc";
+		reg = <0x52007000 0x1000>;
+		interrupts = <49>;
+		clocks = <&rcc SDMMC1_CK>;
+		resets = <&rcc SDMMC1_R>;
+		bus-width = <4>;
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+	};
--
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux