Errata i802 in AM572x Sitara Processors Silicon Revision 2.0, 1.1 (SPRZ429K July 2014–Revised March 2017 [1]) mentions DCRC error interrupts (MMCHS_STAT[21] DCRC=0x1) can occur during the tuning procedure and it has to be disabled during the tuning procedure Implement workaround for Errata i802 here.. [1] -> http://www.ti.com/lit/er/sprz429k/sprz429k.pdf Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx> --- drivers/mmc/host/sdhci-omap.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c index 36e0626d3de2..e24ae903f7ba 100644 --- a/drivers/mmc/host/sdhci-omap.c +++ b/drivers/mmc/host/sdhci-omap.c @@ -257,6 +257,7 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode) u32 start_window = 0, max_window = 0; u8 cur_match, prev_match = 0; u32 length = 0, max_len = 0; + u32 ier = host->ier; u32 phase_delay = 0; int ret = 0; u32 reg; @@ -277,6 +278,16 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode) reg |= DLL_SWT; sdhci_omap_writel(omap_host, SDHCI_OMAP_DLL, reg); + /* + * OMAP5/DRA74X/DRA72x Errata i802: + * DCRC error interrupts (MMCHS_STAT[21] DCRC=0x1) can occur + * during the tuning procedure. So disable it during the + * tuning procedure. + */ + ier &= ~SDHCI_INT_DATA_CRC; + sdhci_writel(host, ier, SDHCI_INT_ENABLE); + sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE); + while (phase_delay <= MAX_PHASE_DELAY) { sdhci_omap_set_dll(omap_host, phase_delay); @@ -322,6 +333,8 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode) ret: sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA); + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); return ret; } -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
