On 14 January 2018 at 19:43, Benoît Thébaudeau
<benoit.thebaudeau.dev@xxxxxxxxx> wrote:
> Commit 5143c953a786 ("mmc: sdhci-esdhc-imx: Allow all supported
> prescaler values") made it possible to set SYSCTL.SDCLKFS to 0 in SDR
> mode, thus bypassing the SD clock frequency prescaler, in order to be
> able to get higher SD clock frequencies in some contexts. However, that
> commit missed the fact that this value is illegal on the eSDHCv3
> instance of the i.MX53. This seems to be the only exception on i.MX,
> this value being legal even for the eSDHCv2 instances of the i.MX53.
>
> Fix this issue by changing the minimum prescaler value if the i.MX53
> eSDHCv3 is detected. According to the i.MX53 reference manual, if
> DLLCTRL[10] can be set, then the controller is eSDHCv3, else it is
> eSDHCv2.
>
> This commit fixes the following issue, which was preventing the i.MX53
> Loco (IMX53QSB) board from booting Linux 4.15.0-rc5:
> [ 1.882668] mmcblk1: error -84 transferring data, sector 2048, nr 8, cmd response 0x900, card status 0xc00
> [ 2.002255] mmcblk1: error -84 transferring data, sector 2050, nr 6, cmd response 0x900, card status 0xc00
> [ 12.645056] mmc1: Timeout waiting for hardware interrupt.
> [ 12.650473] mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
> [ 12.656921] mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00001201
> [ 12.663366] mmc1: sdhci: Blk size: 0x00000004 | Blk cnt: 0x00000000
> [ 12.669813] mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x00000013
> [ 12.676258] mmc1: sdhci: Present: 0x01f8028f | Host ctl: 0x00000013
> [ 12.682703] mmc1: sdhci: Power: 0x00000002 | Blk gap: 0x00000000
> [ 12.689148] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x0000003f
> [ 12.695594] mmc1: sdhci: Timeout: 0x0000008e | Int stat: 0x00000000
> [ 12.702039] mmc1: sdhci: Int enab: 0x107f004b | Sig enab: 0x107f004b
> [ 12.708485] mmc1: sdhci: AC12 err: 0x00000000 | Slot int: 0x00001201
> [ 12.714930] mmc1: sdhci: Caps: 0x07eb0000 | Caps_1: 0x08100810
> [ 12.721375] mmc1: sdhci: Cmd: 0x0000163a | Max curr: 0x00000000
> [ 12.727821] mmc1: sdhci: Resp[0]: 0x00000920 | Resp[1]: 0x00000000
> [ 12.734265] mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
> [ 12.740709] mmc1: sdhci: Host ctl2: 0x00000000
> [ 12.745157] mmc1: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0xc8049200
> [ 12.751601] mmc1: sdhci: ============================================
> [ 12.758110] print_req_error: I/O error, dev mmcblk1, sector 2050
> [ 12.764135] Buffer I/O error on dev mmcblk1p1, logical block 0, lost sync page write
> [ 12.775163] EXT4-fs (mmcblk1p1): mounted filesystem without journal. Opts: (null)
> [ 12.782746] VFS: Mounted root (ext4 filesystem) on device 179:9.
> [ 12.789151] mmcblk1: response CRC error sending SET_BLOCK_COUNT command, card status 0x900
>
> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@xxxxxxxxx>
> Reported-by: Wladimir J. van der Laan <laanwj@xxxxxxxxx>
> Tested-by: Wladimir J. van der Laan <laanwj@xxxxxxxxx>
Thanks, applied for fixes - adding a fixes tag as well as a stable tag!
Kind regards
Uffe
> ---
> drivers/mmc/host/sdhci-esdhc-imx.c | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
> index 85140c9af581..8b941f814472 100644
> --- a/drivers/mmc/host/sdhci-esdhc-imx.c
> +++ b/drivers/mmc/host/sdhci-esdhc-imx.c
> @@ -687,6 +687,20 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host,
> return;
> }
>
> + /* For i.MX53 eSDHCv3, SYSCTL.SDCLKFS may not be set to 0. */
> + if (is_imx53_esdhc(imx_data)) {
> + /*
> + * According to the i.MX53 reference manual, if DLLCTRL[10] can
> + * be set, then the controller is eSDHCv3, else it is eSDHCv2.
> + */
> + val = readl(host->ioaddr + ESDHC_DLL_CTRL);
> + writel(val | BIT(10), host->ioaddr + ESDHC_DLL_CTRL);
> + temp = readl(host->ioaddr + ESDHC_DLL_CTRL);
> + writel(val, host->ioaddr + ESDHC_DLL_CTRL);
> + if (temp & BIT(10))
> + pre_div = 2;
> + }
> +
> temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
> temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
> | ESDHC_CLOCK_MASK);
> --
> 2.14.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
