Hi Adrian, On 29 November 2017 at 14:40, Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote: > Hi > > Here is V15 of the hardware command queue patches without the software > command queue patches, now using blk-mq and now with blk-mq support for > non-CQE I/O. I have applied patches 1->19 for next. Deferring patch 21->23 for a while. For those patches that was more or less the same as in v14, I added Linus' ack. Hopefully we get some help for the community to test this series on different HW (and I will be checking kernelci's boot reports). I haven't added Bartlomiej's tested-by and neither Linus' (because of the changes that has been made), so I hoping that will happen sooner or later. Moreover, I will gladly add more peoples acks/reviewed-by and tested-by tags, at any point during this release cycle. Thanks and kind regards Uffe > > V14 included a number of fixes to existing code, changes to default to > blk-mq, and adds patches to remove legacy code. > > HW CMDQ offers 25% - 50% better random multi-threaded I/O. I see a slight > 2% drop in sequential read speed but no change to sequential write. > > Non-CQE blk-mq showed a 3% decrease in sequential read performance. This > seemed to be coming from the inferior latency of running work items compared > with a dedicated thread. Hacking blk-mq workqueue to be unbound reduced the > performance degradation from 3% to 1%. > > While we should look at changing blk-mq to give better workqueue performance, > a bigger gain is likely to be made by adding a new host API to enable the > next already-prepared request to be issued directly from within ->done() > callback of the current request. > > Changes since V14: > mmc: block: Fix missing blk_put_request() > mmc: block: Check return value of blk_get_request() > mmc: core: Do not leave the block driver in a suspended state > mmc: block: Ensure that debugfs files are removed > Dropped because they have been applied > mmc: block: Use data timeout in card_busy_detect() > Replaced by other patches > mmc: block: Add blk-mq support > Rename mmc_blk_ss_read() to mmc_blk_read_single() > Add more error handling to single sector read > Let mmc_blk_mq_complete_rq() cater for requests already "updated" by recovery > Rename mmc_blk_mq_acct_req_done() to mmc_blk_mq_dec_in_flight() > Add comments about synchronization > Add comment about not dispatching in parallel > Add comment about the queue depth > mmc: block: Add CQE support > Add coment about CQE queue depth > mmc: block: blk-mq: Add support for direct completion > Rename mmc_queue_direct_complete() to mmc_host_done_complete() > Rename MMC_CAP_DIRECT_COMPLETE to MMC_CAP_DONE_COMPLETE > mmc: block: blk-mq: Separate card polling from recovery > Ensure to report gen_err as an error > mmc: block: Make card_busy_detect() accumulate all response error bits > Patch moved later in the patch set and adjusted accordingly > mmc: block: blk-mq: Check error bits and save the exception bit when polling card busy > Adjusted due to patch re-ordering > mmc: block: Check the timeout correctly in card_busy_detect() > New patch. > mmc: block: Add timeout_clks when calculating timeout > New patch. > mmc: block: Reduce polling timeout from 10 minutes to 10 seconds > New patch. > > Changes since V13: > mmc: block: Fix missing blk_put_request() > New patch. > mmc: block: Check return value of blk_get_request() > New patch. > mmc: core: Do not leave the block driver in a suspended state > New patch. > mmc: block: Ensure that debugfs files are removed > New patch. > mmc: block: No need to export mmc_cleanup_queue() > New patch. > mmc: block: Simplify cleaning up the queue > New patch. > mmc: block: Use data timeout in card_busy_detect() > New patch. > mmc: block: Check for transfer state in card_busy_detect() > New patch. > mmc: block: Make card_busy_detect() accumulate all response error bits > New patch. > mmc: core: Make mmc_pre_req() and mmc_post_req() available > New patch. > mmc: core: Add parameter use_blk_mq > Default to y > mmc: block: Add blk-mq support > Wrap blk_mq_end_request / blk_end_request_all > Rename mmc_blk_rw_recovery -> mmc_blk_mq_rw_recovery > Additional parentheses to '==' expressions > Use mmc_pre_req() / mmc_post_req() > Fix missing tuning release on error after mmc_start_request() > Expand comment about timeouts > Allow for possibility that the queue is quiesced when removing > Ensure complete_work is flushed when removing > mmc: block: Add CQE support > Additional parentheses to '==' expressions > mmc: block: blk-mq: Check error bits and save the exception bit when polling card busy > Replaces patch "Stop using card_busy_detect()" retaining card_busy_detect() > mmc: block: blk-mq: Stop using legacy recovery > Allow for SPI > mmc: mmc_test: Do not use mmc_start_areq() anymore > New patch. > mmc: core: Remove option not to use blk-mq > New patch. > mmc: block: Remove code no longer needed after the switch to blk-mq > New patch. > mmc: core: Remove code no longer needed after the switch to blk-mq > New patch. > > Changes since V12: > mmc: block: Add error-handling comments > New patch. > mmc: block: Add blk-mq support > Use legacy error handling > mmc: block: Add CQE support > Re-base > mmc: block: blk-mq: Add support for direct completion > New patch. > mmc: block: blk-mq: Separate card polling from recovery > New patch. > mmc: block: blk-mq: Stop using card_busy_detect() > New patch. > mmc: block: blk-mq: Stop using legacy recovery > New patch. > > Changes since V11: > Split "mmc: block: Add CQE and blk-mq support" into 2 patches > > Changes since V10: > mmc: core: Remove unnecessary host claim > mmc: core: Introduce host claiming by context > mmc: core: Add support for handling CQE requests > mmc: mmc: Enable Command Queuing > mmc: mmc: Enable CQE's > mmc: block: Use local variables in mmc_blk_data_prep() > mmc: block: Prepare CQE data > mmc: block: Factor out mmc_setup_queue() > mmc: core: Add parameter use_blk_mq > mmc: core: Export mmc_start_bkops() > mmc: core: Export mmc_start_request() > mmc: core: Export mmc_retune_hold_now() and mmc_retune_release() > Dropped because they have been applied > mmc: block: Add CQE and blk-mq support > Extend blk-mq support for asynchronous read / writes to all host > controllers including those that require polling. The direct > completion path is still available but depends on a new capability > flag. > Drop blk-mq support for synchronous read / writes. > > Venkat Gopalakrishnan (1): > mmc: cqhci: support for command queue enabled host > > Changes since V9: > mmc: block: Add CQE and blk-mq support > - reinstate mq support for REQ_OP_DRV_IN/OUT that was removed because > it was incorrectly assumed to be handled by the rpmb character device > - don't check for rpmb block device anymore > mmc: cqhci: support for command queue enabled host > Fix cqhci_set_irqs() as per Haibo Chen > > Changes since V8: > Re-based > mmc: core: Introduce host claiming by context > Slightly simplified as per Ulf > mmc: core: Export mmc_retune_hold_now() and mmc_retune_release() > New patch. > mmc: block: Add CQE and blk-mq support > Fix missing ->post_req() on the error path > > Changes since V7: > Re-based > mmc: core: Introduce host claiming by context > Slightly simplified > mmc: core: Add parameter use_blk_mq > New patch. > mmc: core: Remove unnecessary host claim > New patch. > mmc: core: Export mmc_start_bkops() > New patch. > mmc: core: Export mmc_start_request() > New patch. > mmc: block: Add CQE and blk-mq support > Add blk-mq support for non_CQE requests > > Changes since V6: > mmc: core: Introduce host claiming by context > New patch. > mmc: core: Move mmc_start_areq() declaration > Dropped because it has been applied > mmc: block: Fix block status codes > Dropped because it has been applied > mmc: host: Add CQE interface > Dropped because it has been applied > mmc: core: Turn off CQE before sending commands > Dropped because it has been applied > mmc: block: Factor out mmc_setup_queue() > New patch. > mmc: block: Add CQE support > Drop legacy support and add blk-mq support > > Changes since V5: > Re-based > mmc: core: Add mmc_retune_hold_now() > Dropped because it has been applied > mmc: core: Add members to mmc_request and mmc_data for CQE's > Dropped because it has been applied > mmc: core: Move mmc_start_areq() declaration > New patch at Ulf's request > mmc: block: Fix block status codes > Another un-related patch > mmc: host: Add CQE interface > Move recovery_notifier() callback to struct mmc_request > mmc: core: Add support for handling CQE requests > Roll __mmc_cqe_request_done() into mmc_cqe_request_done() > Move function declarations requested by Ulf > mmc: core: Remove unused MMC_CAP2_PACKED_CMD > Dropped because it has been applied > mmc: block: Add CQE support > Add explanation to commit message > Adjustment for changed recovery_notifier() callback > mmc: cqhci: support for command queue enabled host > Adjustment for changed recovery_notifier() callback > mmc: sdhci-pci: Add CQHCI support for Intel GLK > Add DCMD capability for Intel controllers except GLK > > Changes since V4: > mmc: core: Add mmc_retune_hold_now() > Add explanation to commit message. > mmc: host: Add CQE interface > Add comments to callback declarations. > mmc: core: Turn off CQE before sending commands > Add explanation to commit message. > mmc: core: Add support for handling CQE requests > Add comments as requested by Ulf. > mmc: core: Remove unused MMC_CAP2_PACKED_CMD > New patch. > mmc: mmc: Enable Command Queuing > Adjust for removal of MMC_CAP2_PACKED_CMD. > Add a comment about Packed Commands. > mmc: mmc: Enable CQE's > Remove un-necessary check for MMC_CAP2_CQE > mmc: block: Use local variables in mmc_blk_data_prep() > New patch. > mmc: block: Prepare CQE data > Adjust due to "mmc: block: Use local variables in mmc_blk_data_prep()" > Remove priority setting. > Add explanation to commit message. > mmc: cqhci: support for command queue enabled host > Fix transfer descriptor setting in cqhci_set_tran_desc() for 32-bit DMA > > Changes since V3: > Adjusted ...blk_end_request...() for new block status codes > Fixed CQHCI transaction descriptor for "no DCMD" case > > Changes since V2: > Dropped patches that have been applied. > Re-based > Added "mmc: sdhci-pci: Add CQHCI support for Intel GLK" > > Changes since V1: > > "Share mmc request array between partitions" is dependent > on changes in "Introduce queue semantics", so added that > and block fixes: > > Added "Fix is_waiting_last_req set incorrectly" > Added "Fix cmd error reset failure path" > Added "Use local var for mqrq_cur" > Added "Introduce queue semantics" > > Changes since RFC: > > Re-based on next. > Added comment about command queue priority. > Added some acks and reviews. > > > Adrian Hunter (21): > mmc: block: No need to export mmc_cleanup_queue() > mmc: block: Simplify cleaning up the queue > mmc: core: Make mmc_pre_req() and mmc_post_req() available > mmc: block: Add error-handling comments > mmc: core: Add parameter use_blk_mq > mmc: block: Add blk-mq support > mmc: block: Add CQE support > mmc: sdhci-pci: Add CQHCI support for Intel GLK > mmc: block: blk-mq: Add support for direct completion > mmc: block: blk-mq: Separate card polling from recovery > mmc: block: Make card_busy_detect() accumulate all response error bits > mmc: block: blk-mq: Check error bits and save the exception bit when polling card busy > mmc: block: Check the timeout correctly in card_busy_detect() > mmc: block: Check for transfer state in card_busy_detect() > mmc: block: Add timeout_clks when calculating timeout > mmc: block: Reduce polling timeout from 10 minutes to 10 seconds > mmc: block: blk-mq: Stop using legacy recovery > mmc: mmc_test: Do not use mmc_start_areq() anymore > mmc: core: Remove option not to use blk-mq > mmc: block: Remove code no longer needed after the switch to blk-mq > mmc: core: Remove code no longer needed after the switch to blk-mq > > Venkat Gopalakrishnan (1): > mmc: cqhci: support for command queue enabled host > > drivers/mmc/core/block.c | 1383 +++++++++++++++++++++---------------- > drivers/mmc/core/block.h | 12 +- > drivers/mmc/core/bus.c | 2 - > drivers/mmc/core/core.c | 216 +----- > drivers/mmc/core/core.h | 39 +- > drivers/mmc/core/host.h | 6 +- > drivers/mmc/core/mmc_test.c | 122 ++-- > drivers/mmc/core/queue.c | 504 +++++++++----- > drivers/mmc/core/queue.h | 64 +- > drivers/mmc/host/Kconfig | 14 + > drivers/mmc/host/Makefile | 1 + > drivers/mmc/host/cqhci.c | 1150 ++++++++++++++++++++++++++++++ > drivers/mmc/host/cqhci.h | 240 +++++++ > drivers/mmc/host/sdhci-pci-core.c | 155 ++++- > include/linux/mmc/host.h | 5 +- > 15 files changed, 2835 insertions(+), 1078 deletions(-) > create mode 100644 drivers/mmc/host/cqhci.c > create mode 100644 drivers/mmc/host/cqhci.h > > > Regards > Adrian -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
