Re: [PATCH v5 2/2] mmc: sdio support external scatter gather list

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Please just clean the API up to allways pass a struct scatterlist
and just expose a maximumber number of segments value.

Last but not least please send this along with the actual consumers
of your API.

On Wed, Nov 22, 2017 at 03:53:42PM +0800, Xinming Hu wrote:
> Currently sdio device drivers need to prepare a big continuous
> physical memory for large data transfer. mmc stack will construct
> scatter/gather buffer list to make use of ADMA2.
> 
> According to the sdio host controller specification version 4.00
> chapter 1.13.2, sdio device drivers have the ability to construct
> scatter/gather DMA buffer list. In this way, they do not need to allocate
> big memory.
> 
> This patch refactors current sdio command 53 wrapper mmc_io_rw_extended,
> so that it can accept external scatter/gather buffer list from its caller,
> such as the sdio device driver. This patch is very useful on some embedded
> systems where large memory allocation fails sometimes. It gives 10 to 15%
> better throughput performance compared to a case in which small single
> data transfers are done.
> 
> Signed-off-by: Xinming Hu <huxm@xxxxxxxxxxx>
> Signed-off-by: Amitkumar Karwar <akarwar@xxxxxxxxxxx>
> ---
> v4: same as v3/v2/v1
> v5: rebased on latest codebase
> ---
>  drivers/mmc/core/sdio_io.c    | 22 ++++++++++++++++--
>  drivers/mmc/core/sdio_ops.c   | 53 +++++++++++++++++++++++++++++++++++++++----
>  drivers/mmc/core/sdio_ops.h   |  3 ++-
>  include/linux/mmc/sdio_func.h |  6 +++++
>  4 files changed, 76 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c
> index 4806521..6046511 100644
> --- a/drivers/mmc/core/sdio_io.c
> +++ b/drivers/mmc/core/sdio_io.c
> @@ -327,7 +327,7 @@ static int sdio_io_rw_ext_helper(struct sdio_func *func, int write,
>  			size = blocks * func->cur_blksize;
>  
>  			ret = mmc_io_rw_extended(func->card, write,
> -				func->num, addr, incr_addr, buf,
> +				func->num, addr, incr_addr, false, buf,
>  				blocks, func->cur_blksize);
>  			if (ret)
>  				return ret;
> @@ -345,7 +345,7 @@ static int sdio_io_rw_ext_helper(struct sdio_func *func, int write,
>  
>  		/* Indicate byte mode by setting "blocks" = 0 */
>  		ret = mmc_io_rw_extended(func->card, write, func->num, addr,
> -			 incr_addr, buf, 0, size);
> +			 incr_addr, false, buf, 0, size);
>  		if (ret)
>  			return ret;
>  
> @@ -513,6 +513,24 @@ int sdio_writesb(struct sdio_func *func, unsigned int addr, void *src,
>  }
>  EXPORT_SYMBOL_GPL(sdio_writesb);
>  
> +int sdio_readsb_sg_enh(struct sdio_func *func, unsigned int addr,
> +		       struct sg_table *dst)
> +{
> +	return mmc_io_rw_extended(func->card, 0, func->num,
> +				  addr, 0, true,
> +				  dst, 0, func->cur_blksize);
> +}
> +EXPORT_SYMBOL_GPL(sdio_readsb_sg_enh);
> +
> +int sdio_writesb_sg_enh(struct sdio_func *func, unsigned int addr,
> +			struct sg_table *src)
> +{
> +	return mmc_io_rw_extended(func->card, 1, func->num,
> +				  addr, 0, true,
> +				  src, 0, func->cur_blksize);
> +}
> +EXPORT_SYMBOL_GPL(sdio_writesb_sg_enh);
> +
>  /**
>   *	sdio_readw - read a 16 bit integer from a SDIO function
>   *	@func: SDIO function to access
> diff --git a/drivers/mmc/core/sdio_ops.c b/drivers/mmc/core/sdio_ops.c
> index abaaba3..2310a2a 100644
> --- a/drivers/mmc/core/sdio_ops.c
> +++ b/drivers/mmc/core/sdio_ops.c
> @@ -115,16 +115,39 @@ int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
>  	return mmc_io_rw_direct_host(card->host, write, fn, addr, in, out);
>  }
>  
> +/**
> + *     mmc_io_rw_extended - wrapper for sdio command 53 read/write operation
> + *     @card: destination device for read/write
> + *     @write: zero indcate read, non-zero indicate write.
> + *     @fn: SDIO function to access
> + *     @addr: address of (single byte) FIFO
> + *     @incr_addr: set to 1 indicate read or write multiple bytes
> +		of data to/from an IO register address that
> +		increment by 1 after each operation.
> + *     @sg_enhance: if set true, the caller of this function will
> +		prepare scatter gather dma buffer list.
> + *     @buf: buffer that contains the data to write. if sg_enhance
> +		is set, it point to SG dma buffer list.
> + *     @blocks: number of blocks of data transfer.
> +		if set zero, indicate byte mode
> +		if set non-zero, indicate block mode
> +		if sg_enhance is set, this parameter will not be used.
> + *     @blksz: block size for block mode data transfer.
> + *
> + */
>  int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
> -	unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz)
> +		       unsigned int addr, int incr_addr, bool sg_enhance,
> +		       void *buf, unsigned int blocks, unsigned int blksz)
>  {
>  	struct mmc_request mrq = {};
>  	struct mmc_command cmd = {};
>  	struct mmc_data data = {};
>  	struct scatterlist sg, *sg_ptr;
>  	struct sg_table sgtable;
> +	struct sg_table *sgtable_external;
>  	unsigned int nents, left_size, i;
>  	unsigned int seg_size = card->host->max_seg_size;
> +	unsigned int sg_blocks = 0;
>  
>  	WARN_ON(blksz == 0);
>  
> @@ -140,16 +163,35 @@ int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
>  	cmd.arg |= fn << 28;
>  	cmd.arg |= incr_addr ? 0x04000000 : 0x00000000;
>  	cmd.arg |= addr << 9;
> +	cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC;
> +
> +	data.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
> +	data.blksz = blksz;
> +
> +	if (sg_enhance) {
> +		sgtable_external = buf;
> +
> +		for_each_sg(sgtable_external->sgl, sg_ptr,
> +			    sgtable_external->nents, i) {
> +			if (sg_ptr->length > card->host->max_seg_size)
> +				return -EINVAL;
> +			sg_blocks += DIV_ROUND_UP(sg_ptr->length, blksz);
> +		}
> +
> +		cmd.arg |= 0x08000000 | sg_blocks;
> +		data.blocks = sg_blocks;
> +		data.sg = sgtable_external->sgl;
> +		data.sg_len = sgtable_external->nents;
> +		goto mmc_data_req;
> +	}
> +
>  	if (blocks == 0)
>  		cmd.arg |= (blksz == 512) ? 0 : blksz;	/* byte mode */
>  	else
>  		cmd.arg |= 0x08000000 | blocks;		/* block mode */
> -	cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC;
>  
> -	data.blksz = blksz;
>  	/* Code in host drivers/fwk assumes that "blocks" always is >=1 */
>  	data.blocks = blocks ? blocks : 1;
> -	data.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
>  
>  	left_size = data.blksz * data.blocks;
>  	nents = DIV_ROUND_UP(left_size, seg_size);
> @@ -172,11 +214,12 @@ int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
>  		sg_init_one(&sg, buf, left_size);
>  	}
>  
> +mmc_data_req:
>  	mmc_set_data_timeout(&data, card);
>  
>  	mmc_wait_for_req(card->host, &mrq);
>  
> -	if (nents > 1)
> +	if (!sg_enhance && nents > 1)
>  		sg_free_table(&sgtable);
>  
>  	if (cmd.error)
> diff --git a/drivers/mmc/core/sdio_ops.h b/drivers/mmc/core/sdio_ops.h
> index 96945ca..2d75100 100644
> --- a/drivers/mmc/core/sdio_ops.h
> +++ b/drivers/mmc/core/sdio_ops.h
> @@ -23,7 +23,8 @@
>  int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
>  	unsigned addr, u8 in, u8* out);
>  int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
> -	unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz);
> +		       unsigned int addr, int incr_addr, bool sg_enhance,
> +		       void *buf, unsigned int blocks, unsigned int blksz);
>  int sdio_reset(struct mmc_host *host);
>  unsigned int mmc_align_data_size(struct mmc_card *card, unsigned int sz);
>  void sdio_irq_work(struct work_struct *work);
> diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h
> index 72d4de4..d36ba47 100644
> --- a/include/linux/mmc/sdio_func.h
> +++ b/include/linux/mmc/sdio_func.h
> @@ -14,6 +14,7 @@
>  
>  #include <linux/device.h>
>  #include <linux/mod_devicetable.h>
> +#include <linux/scatterlist.h>
>  
>  #include <linux/mmc/pm.h>
>  
> @@ -136,6 +137,11 @@ extern int sdio_memcpy_fromio(struct sdio_func *func, void *dst,
>  extern int sdio_readsb(struct sdio_func *func, void *dst,
>  	unsigned int addr, int count);
>  
> +int sdio_readsb_sg_enh(struct sdio_func *func, unsigned int addr,
> +		       struct sg_table *dst);
> +int sdio_writesb_sg_enh(struct sdio_func *func, unsigned int addr,
> +			struct sg_table *src);
> +
>  extern void sdio_writeb(struct sdio_func *func, u8 b,
>  	unsigned int addr, int *err_ret);
>  extern void sdio_writew(struct sdio_func *func, u16 b,
> -- 
> 1.9.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
---end quoted text---
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux