From: Masaharu Hayakawa <masaharu.hayakawa.ry@xxxxxxxxxxx>
As documented in Documentation/timers/timers-howto.txt
as follows, replace msleep() with usleep_range().
msleep(1~20) may not do what the caller intends, and
will often sleep longer (~20 ms actual sleep for any
value given in the 1~20ms range). In many cases this
is not the desired behavior.
Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@xxxxxxxxxxx>
Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
v1 [Simon Horman]
* Extend to cover all instances of msleep(<20);
v0 [Masaharu Hayakawa]
This patch is based on a patch in BSP v3.5.6
---
drivers/mmc/host/tmio_mmc_core.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index 4c8198f8b04a..583bf3262df5 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -167,11 +167,11 @@ static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
/* HW engineers overrode docs: no sleep needed on R-Car2+ */
if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
- msleep(10);
+ usleep_range(10000, 11000);
if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) {
sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100);
- msleep(10);
+ usleep_range(10000, 11000);
}
}
@@ -179,7 +179,7 @@ static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
{
if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) {
sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000);
- msleep(10);
+ usleep_range(10000, 11000);
}
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
@@ -187,7 +187,7 @@ static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
/* HW engineers overrode docs: no sleep needed on R-Car2+ */
if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
- msleep(10);
+ usleep_range(10000, 11000);
}
static void tmio_mmc_set_clock(struct tmio_mmc_host *host,
@@ -219,7 +219,7 @@ static void tmio_mmc_set_clock(struct tmio_mmc_host *host,
sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & CLK_CTL_DIV_MASK);
if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
- msleep(10);
+ usleep_range(10000, 11000);
tmio_mmc_clk_start(host);
}
@@ -230,11 +230,11 @@ static void tmio_mmc_reset(struct tmio_mmc_host *host)
sd_ctrl_write16(host, CTL_RESET_SD, 0x0000);
if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG)
sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000);
- msleep(10);
+ usleep_range(10000, 11000);
sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG)
sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001);
- msleep(10);
+ usleep_range(10000, 11000);
if (host->pdata->flags & TMIO_MMC_SDIO_IRQ) {
sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
