On 2 November 2017 at 00:08, Rob Herring <robh@xxxxxxxxxx> wrote: > On Wed, Nov 01, 2017 at 12:21:32AM +0000, Ard Biesheuvel wrote: >> The Socionext SynQuacer SoC inherits this IP from Fujitsu, but >> requires the F_SDH30_CMD_DAT_DELAY bit to be set in the >> F_SDH30_ESD_CONTROL control register. >> >> So let's add an optional property to this device's binding, and >> set the attribute if it is present in the DT node. >> >> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx> >> --- >> Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt | 2 ++ >> drivers/mmc/host/sdhci_f_sdh30.c | 18 +++++++++++++++++- >> 2 files changed, 19 insertions(+), 1 deletion(-) >> >> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt >> index de2c53cff4f1..9ad02f743ad0 100644 >> --- a/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt >> +++ b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt >> @@ -15,6 +15,8 @@ Required properties: >> Optional properties: >> - vqmmc-supply: phandle to the regulator device tree node, mentioned >> as the VCCQ/VDD_IO supply in the eMMC/SD specs. >> +- cmd-dat-delay-select: boolean property indicating that this host requires >> + the CMD_DAT_DELAY control to be enabled. > > Needs a vendor prefix unless this is a standard SDHCI bit (in which > case it should be documented in a common spot). > I suspect this is a non-standard thing, so I'll add the fujitsu prefix. Ulf? -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
