On Fri, 2017-10-13 at 16:50 -0500, Rob Herring wrote: > On Wed, Oct 11, 2017 at 10:41:25AM +0800, Chaotian Jing wrote: > > Change the comptiable for support of multi-platform > > Make compatible explicit > > Add description for reg > > Add description for source_cg > > Add description for mediatek,latch-ck > > Note that source_cg and mediatek,latch-ck are optional for some projects, > > eg, MT2701 do not have source_cg, and MT2712 do not need > > mediatek,latch-ck > > > > Signed-off-by: Chaotian Jing <chaotian.jing@xxxxxxxxxxxx> > > --- > > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 16 +++++++++++++--- > > 1 file changed, 13 insertions(+), 3 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > > index 4182ea3..2bb585b 100644 > > --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt > > +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt > > @@ -7,10 +7,18 @@ This file documents differences between the core properties in mmc.txt > > and the properties used by the msdc driver. > > > > Required properties: > > -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc" > > +- compatible: value should be either of the following. > > + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135 > > + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 > > + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 > > + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 > > +- reg: physical base address of the controller and length > > - interrupts: Should contain MSDC interrupt number > > -- clocks: MSDC source clock, HCLK > > -- clock-names: "source", "hclk" > > +- clocks: Should contain phandle for the clock feeding the MMC controller > > +- clock-names: Should contain the following: > > + "source" - source clock (required) > > + "hclk" - HCLK which used for host (required) > > + "source_cg" - independent source clock gate (required for MT2712) > > - pinctrl-names: should be "default", "state_uhs" > > - pinctrl-0: should contain default/high speed pin ctrl > > - pinctrl-1: should contain uhs mode pin ctrl > > @@ -30,6 +38,8 @@ Optional properties: > > - mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection > > If present,HS400 command responses are sampled on rising edges. > > If not present,HS400 command responses are sampled on falling edges. > > +- mediatek,latch-ck: Some SoCs do not support enhance_rx, need set correct latch-ck to avoid data crc > > + error caused by stop clock(fifo full) > > What values are supported? What's the default if not present. > > Be clear what compatible strings this property applies to or doesn't > apply to. OK, will make it more clearly at next version. Thx! > > Rob -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
