Hi Simon,
On Fri, Oct 13, 2017 at 12:38 PM, Simon Horman
<horms+renesas@xxxxxxxxxxxx> wrote:
> Provide an example of the usage of the DT bindings for TMIO
> in their documentation. The example given is for the r8a7790 (R-Car H1).
r8a7790 == R-Car H2?
> Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/mmc/tmio_mmc.txt | 54 ++++++++++++++++++++++
> 1 file changed, 54 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
> index 54ef642f23a0..99be4e7e7391 100644
> --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
> +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
> @@ -43,3 +43,57 @@ Optional properties:
> - pinctrl-names: should be "default", "state_uhs"
> - pinctrl-0: should contain default/high speed pin ctrl
> - pinctrl-1: should contain uhs mode pin ctrl
> +
> +Example: R8A7779 (R-Car H1) SDHI controller nodes
OK (r8a7779 == R-Car H1)
> +
> + sdhi0: sd@ee100000 {
> + compatible = "renesas,sdhi-r8a7790";
r8a7790 == R-Car H2?
> + reg = <0 0xee100000 0 0x328>;
> + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
r8a7790 == R-Car H2?
> + dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
> + <&dmac1 0xcd>, <&dmac1 0xce>;
> + dma-names = "tx", "rx", "tx", "rx";
> + max-frequency = <195000000>;
> + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
r8a7790 == R-Car H2?
> + status = "disabled";
> + };
etc...
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
