Hi all,
For the first time ever, I saw a dangerous looking "exceeding card's volts"
on Salvator-X with R-Car M3-W ES1.0:
NET: Registered protocol family 15
can: controller area network core (rev 20170425 abi 9)
NET: Registered protocol family 29
+renesas_sdhi_internal_dmac ee140000.sd: Tuning procedure failed
+mmc0: tuning execution failed: -5
+mmc0: error -5 whilst initialising MMC card
can: raw protocol (rev 20170425)
can: broadcast manager protocol (rev 20170425 t)
can: netlink gateway (rev 20170425) max_hops=1
+renesas_sdhi_internal_dmac ee140000.sd: exceeding card's volts
renesas_irqc e61c0000.interrupt-controller: adding to PM domain always-on
+mmc0: error -110 whilst initialising MMC card
renesas_irqc e61c0000.interrupt-controller: driving 6 irqs
During next boot, everything was back to normal again...
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
