Re: [RFC v2 0/2] Add support for Meson MX "SDIO" MMC controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

On Wed, Sep 27, 2017 at 9:36 PM, Rob Herring <robh@xxxxxxxxxx> wrote:
> On Sun, Sep 24, 2017 at 09:05:26PM +0200, Martin Blumenstingl wrote:
>> This is the successor to Carlo Caione's "Add support for Amlogic Meson
>> MMC driver" series (v5) from [0].
>> This new driver is for the "SDIO" controller found in Amlogic Meson6,
>> Meson8 and Meson8b SoCs and supports an internal mux to allow connecting
>> three cards to it.
>>
>>
>> changes since RFC v1 at [1]:
>> - added COMMON_CLK dependency as reported by the kbuild test robot
>> - use of_platform_device_{create,destroy} instead of open-coding it's
>>   logic
>> - moved struct device (which was an array) from meson_mx_mmc_host to
>>   the corresponding meson_mx_mmc_slot
>> - use struct mmc_command's busy_timeout instead of hard-coding the
>>   timeout values in meson_mx_mmc_start_cmd()
>> - don't use arrays with only one element for the clock parents in
>>   meson_mx_mmc_register_clks()
>> - removed the wrapper functions meson_mx_mmc_readl() meson_mx_mmc_writel()
>> - allow setting the MMC clock to 0 for UHS speed mode (the actual
>>   hardware clock cannot be gated as far as I know, so instead the
>>   lowest supported rate is chosen)
>> - remove unused #include <linux/init.h>
>> - add MMC_CAP_ERASE
>> - removed multiple slot support after discussing this with Ulf
>>   (this is a feature that needs to be part of the MMC core before drivers
>>   can use it)
>> - removed SDIO interrupt support (as I currently don't have a way to
>>   test it)
>> - merge meson_mx_mmc_apply_ios into meson_mx_mmc_set_ios (as that's
>>   the only place where it's needed after removing multiple slot support)
>> - updated the commit message of the driver patch to indicate the
>>   difference between the meson-mx-sdio.c and meson-gx.c (and the "still
>>   missing SDHC") driver
>> - NOTE: I did not add Rob's ACK on the dt-bindings patch because I
>>   introduced the "mmc-slot" compatible for the child nodes as suggested
>>   by Ulf (and I want confirmation from the DT maintainers that I did this
>>   correctly)
>
> Didn't slot support get removed as no h/w really uses that feature?
I have at least one boards which uses it: Endless Mini (EC-100)
the SoC itself has two MMC controllers, but that board has:
- an eMMC module (connected to a yet unsupported MMC controller)
- an internal SD card (connected to the SDIO controller from this patch)
- a RTL8723BS wifi SDIO card (also connected to the SDIO controller
from this patch)

so it's pretty rare - but such hardware exists.


Regards,
Martin
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux