> -----Original Message----- > From: Adrian Hunter [mailto:adrian.hunter@xxxxxxxxx] > Sent: Friday, September 22, 2017 8:37 PM > To: Ulf Hansson <ulf.hansson@xxxxxxxxxx> > Cc: linux-mmc <linux-mmc@xxxxxxxxxxxxxxx>; linux-block <linux- > block@xxxxxxxxxxxxxxx>; linux-kernel <linux-kernel@xxxxxxxxxxxxxxx>; Bough > Chen <haibo.chen@xxxxxxx>; Alex Lemberg <alex.lemberg@xxxxxxxxxxx>; > Mateusz Nowak <mateusz.nowak@xxxxxxxxx>; Yuliy Izrailov > <Yuliy.Izrailov@xxxxxxxxxxx>; Jaehoon Chung <jh80.chung@xxxxxxxxxxx>; > Dong Aisheng <dongas86@xxxxxxxxx>; Das Asutosh > <asutoshd@xxxxxxxxxxxxxx>; Zhangfei Gao <zhangfei.gao@xxxxxxxxx>; > Sahitya Tummala <stummala@xxxxxxxxxxxxxx>; Harjani Ritesh > <riteshh@xxxxxxxxxxxxxx>; Venu Byravarasu <vbyravarasu@xxxxxxxxxx>; > Linus Walleij <linus.walleij@xxxxxxxxxx>; Shawn Lin <shawn.lin@rock- > chips.com>; Christoph Hellwig <hch@xxxxxx> > Subject: [PATCH V9 14/15] mmc: cqhci: support for command queue enabled > host > > From: Venkat Gopalakrishnan <venkatg@xxxxxxxxxxxxxx> > > This patch adds CMDQ support for command-queue compatible hosts. > > Command queue is added in eMMC-5.1 specification. This enables the > controller to process upto 32 requests at a time. > > Adrian Hunter contributed renaming to cqhci, recovery, suspend and resume, > cqhci_off, cqhci_wait_for_idle, and external timeout handling. > > Signed-off-by: Asutosh Das <asutoshd@xxxxxxxxxxxxxx> > Signed-off-by: Sujit Reddy Thumma <sthumma@xxxxxxxxxxxxxx> > Signed-off-by: Konstantin Dorfman <kdorfman@xxxxxxxxxxxxxx> > Signed-off-by: Venkat Gopalakrishnan <venkatg@xxxxxxxxxxxxxx> > Signed-off-by: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx> > Signed-off-by: Ritesh Harjani <riteshh@xxxxxxxxxxxxxx> > Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx> > --- > drivers/mmc/host/Kconfig | 13 + > drivers/mmc/host/Makefile | 1 + > drivers/mmc/host/cqhci.c | 1154 > +++++++++++++++++++++++++++++++++++++++++++++ > drivers/mmc/host/cqhci.h | 240 ++++++++++ > 4 files changed, 1408 insertions(+) > create mode 100644 drivers/mmc/host/cqhci.c create mode 100644 > drivers/mmc/host/cqhci.h > > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index > 17afe1ad3a03..f2751465bc54 100644 > --- a/drivers/mmc/host/Kconfig > +++ b/drivers/mmc/host/Kconfig > @@ -843,6 +843,19 @@ config MMC_SUNXI > This selects support for the SD/MMC Host Controller on > Allwinner sunxi SoCs. > > +config MMC_CQHCI > + tristate "Command Queue Host Controller Interface support" > + depends on HAS_DMA > + help > + This selects the Command Queue Host Controller Interface (CQHCI) > + support present in host controllers of Qualcomm Technologies, Inc > + amongst others. > + This controller supports eMMC devices with command queue support. > + > + If you have a controller with this interface, say Y or M here. > + > + If unsure, say N. > + > config MMC_TOSHIBA_PCI > tristate "Toshiba Type A SD/MMC Card Interface Driver" > depends on PCI > diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index > 2b5a8133948d..f01d9915304d 100644 > --- a/drivers/mmc/host/Makefile > +++ b/drivers/mmc/host/Makefile > @@ -90,6 +90,7 @@ obj-$(CONFIG_MMC_SDHCI_ST) += sdhci-st.o > obj-$(CONFIG_MMC_SDHCI_MICROCHIP_PIC32) += sdhci-pic32.o > obj-$(CONFIG_MMC_SDHCI_BRCMSTB) += sdhci-brcmstb.o > obj-$(CONFIG_MMC_SDHCI_OMAP) += sdhci-omap.o > +obj-$(CONFIG_MMC_CQHCI) += cqhci.o > > ifeq ($(CONFIG_CB710_DEBUG),y) > CFLAGS-cb710-mmc += -DDEBUG > diff --git a/drivers/mmc/host/cqhci.c b/drivers/mmc/host/cqhci.c new file > mode 100644 index 000000000000..eb3c1695b0c7 > --- /dev/null > +++ b/drivers/mmc/host/cqhci.c > @@ -0,0 +1,1154 @@ > +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 and > + * only version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <linux/delay.h> > +#include <linux/highmem.h> > +#include <linux/io.h> > +#include <linux/module.h> > +#include <linux/dma-mapping.h> > +#include <linux/slab.h> > +#include <linux/scatterlist.h> > +#include <linux/platform_device.h> > +#include <linux/ktime.h> > + > +#include <linux/mmc/mmc.h> > +#include <linux/mmc/host.h> > +#include <linux/mmc/card.h> > + > +#include "cqhci.h" > + > +#define DCMD_SLOT 31 > +#define NUM_SLOTS 32 > + > +struct cqhci_slot { > + struct mmc_request *mrq; > + unsigned int flags; > +#define CQHCI_EXTERNAL_TIMEOUT BIT(0) > +#define CQHCI_COMPLETED BIT(1) > +#define CQHCI_HOST_CRC BIT(2) > +#define CQHCI_HOST_TIMEOUT BIT(3) > +#define CQHCI_HOST_OTHER BIT(4) > +}; > + > +static inline u8 *get_desc(struct cqhci_host *cq_host, u8 tag) { > + return cq_host->desc_base + (tag * cq_host->slot_sz); } > + > +static inline u8 *get_link_desc(struct cqhci_host *cq_host, u8 tag) { > + u8 *desc = get_desc(cq_host, tag); > + > + return desc + cq_host->task_desc_len; > +} > + > +static inline dma_addr_t get_trans_desc_dma(struct cqhci_host *cq_host, > +u8 tag) { > + return cq_host->trans_desc_dma_base + > + (cq_host->mmc->max_segs * tag * > + cq_host->trans_desc_len); > +} > + > +static inline u8 *get_trans_desc(struct cqhci_host *cq_host, u8 tag) { > + return cq_host->trans_desc_base + > + (cq_host->trans_desc_len * cq_host->mmc->max_segs * tag); } > + > +static void setup_trans_desc(struct cqhci_host *cq_host, u8 tag) { > + u8 *link_temp; > + dma_addr_t trans_temp; > + > + link_temp = get_link_desc(cq_host, tag); > + trans_temp = get_trans_desc_dma(cq_host, tag); > + > + memset(link_temp, 0, cq_host->link_desc_len); > + if (cq_host->link_desc_len > 8) > + *(link_temp + 8) = 0; > + > + if (tag == DCMD_SLOT && (cq_host->mmc->caps2 & > MMC_CAP2_CQE_DCMD)) { > + *link_temp = CQHCI_VALID(0) | CQHCI_ACT(0) | > CQHCI_END(1); > + return; > + } > + > + *link_temp = CQHCI_VALID(1) | CQHCI_ACT(0x6) | CQHCI_END(0); > + > + if (cq_host->dma64) { > + __le64 *data_addr = (__le64 __force *)(link_temp + 4); > + > + data_addr[0] = cpu_to_le64(trans_temp); > + } else { > + __le32 *data_addr = (__le32 __force *)(link_temp + 4); > + > + data_addr[0] = cpu_to_le32(trans_temp); > + } > +} > + > +static void cqhci_set_irqs(struct cqhci_host *cq_host, u32 set) { > + u32 ier; > + > + ier = cqhci_readl(cq_host, CQHCI_ISTE); > + ier |= set; Hi Adrian, I think operation ' |= ' is not correct, since we will also call cqhci_set_irqs(cq_host, 0), Which means to mask all cmdq irq, so I think better to directly write the parameter 'set' to ISTE and ISGE. Best Regards, Haibo Chen > + cqhci_writel(cq_host, ier, CQHCI_ISTE); > + cqhci_writel(cq_host, ier, CQHCI_ISGE); } > + > +#define DRV_NAME "cqhci" > + -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
