SD clock should be disabled for clock value 0. It's not
right to just return. This may cause failure of signal
voltage switching.
Signed-off-by: Yangbo Lu <yangbo.lu@xxxxxxx>
Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
---
Changes for v2:
- Moved esdhc_clock_enable() instead of forware declaring.
- Added "Acked-by: Adrian Hunter".
---
drivers/mmc/host/sdhci-of-esdhc.c | 58 ++++++++++++++++++++-------------------
1 file changed, 30 insertions(+), 28 deletions(-)
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index d96a057a7db8..1f424374bbbb 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -458,6 +458,33 @@ static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host)
return clock / 256 / 16;
}
+static void esdhc_clock_enable(struct sdhci_host *host, bool enable)
+{
+ u32 val;
+ ktime_t timeout;
+
+ val = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
+
+ if (enable)
+ val |= ESDHC_CLOCK_SDCLKEN;
+ else
+ val &= ~ESDHC_CLOCK_SDCLKEN;
+
+ sdhci_writel(host, val, ESDHC_SYSTEM_CONTROL);
+
+ /* Wait max 20 ms */
+ timeout = ktime_add_ms(ktime_get(), 20);
+ val = ESDHC_CLOCK_STABLE;
+ while (!(sdhci_readl(host, ESDHC_PRSSTAT) & val)) {
+ if (ktime_after(ktime_get(), timeout)) {
+ pr_err("%s: Internal clock never stabilised.\n",
+ mmc_hostname(host->mmc));
+ break;
+ }
+ udelay(10);
+ }
+}
+
static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -469,8 +496,10 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
host->mmc->actual_clock = 0;
- if (clock == 0)
+ if (clock == 0) {
+ esdhc_clock_enable(host, false);
return;
+ }
/* Workaround to start pre_div at 2 for VNN < VENDOR_V_23 */
if (esdhc->vendor_ver < VENDOR_V_23)
@@ -558,33 +587,6 @@ static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width)
sdhci_writel(host, ctrl, ESDHC_PROCTL);
}
-static void esdhc_clock_enable(struct sdhci_host *host, bool enable)
-{
- u32 val;
- ktime_t timeout;
-
- val = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
-
- if (enable)
- val |= ESDHC_CLOCK_SDCLKEN;
- else
- val &= ~ESDHC_CLOCK_SDCLKEN;
-
- sdhci_writel(host, val, ESDHC_SYSTEM_CONTROL);
-
- /* Wait max 20 ms */
- timeout = ktime_add_ms(ktime_get(), 20);
- val = ESDHC_CLOCK_STABLE;
- while (!(sdhci_readl(host, ESDHC_PRSSTAT) & val)) {
- if (ktime_after(ktime_get(), timeout)) {
- pr_err("%s: Internal clock never stabilised.\n",
- mmc_hostname(host->mmc));
- break;
- }
- udelay(10);
- }
-}
-
static void esdhc_reset(struct sdhci_host *host, u8 mask)
{
sdhci_reset(host, mask);
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
