Some Intel host controllers (e.g. CNP) use an ACPI device-specific method
to ensure correct voltage switching. Fix voltage switch for those, by
adding a call to the DSM.
Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
drivers/mmc/host/sdhci-pci-core.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index bbaddf18a1b3..d0ccc6729fd2 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -392,6 +392,7 @@ static int mfd_sdio_probe_slot(struct sdhci_pci_slot *slot)
enum {
INTEL_DSM_FNS = 0,
+ INTEL_DSM_V18_SWITCH = 3,
INTEL_DSM_DRV_STRENGTH = 9,
INTEL_DSM_D3_RETUNE = 10,
};
@@ -557,6 +558,19 @@ static void intel_hs400_enhanced_strobe(struct mmc_host *mmc,
sdhci_writel(host, val, INTEL_HS400_ES_REG);
}
+static void sdhci_intel_voltage_switch(struct sdhci_host *host)
+{
+ struct sdhci_pci_slot *slot = sdhci_priv(host);
+ struct intel_host *intel_host = sdhci_pci_priv(slot);
+ struct device *dev = &slot->chip->pdev->dev;
+ u32 result = 0;
+ int err;
+
+ err = intel_dsm(intel_host, dev, INTEL_DSM_V18_SWITCH, &result);
+ pr_debug("%s: %s DSM error %d result %u\n",
+ mmc_hostname(host->mmc), __func__, err, result);
+}
+
static const struct sdhci_ops sdhci_intel_byt_ops = {
.set_clock = sdhci_set_clock,
.set_power = sdhci_intel_set_power,
@@ -565,6 +579,7 @@ static void intel_hs400_enhanced_strobe(struct mmc_host *mmc,
.reset = sdhci_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
.hw_reset = sdhci_pci_hw_reset,
+ .voltage_switch = sdhci_intel_voltage_switch,
};
static void byt_read_dsm(struct sdhci_pci_slot *slot)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
