The patch
regulator: pbias: Select voltage table based on max-voltage
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 27eae9d4b9d4cd9c204ef81f46078d91362ed41c Mon Sep 17 00:00:00 2001
From: Ravikumar Kattekola <rk@xxxxxx>
Date: Thu, 31 Aug 2017 15:48:45 +0530
Subject: [PATCH] regulator: pbias: Select voltage table based on max-voltage
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Reference manuals of OMAP5x and DRA7x have been updated to reflect
the PBIAS regulator max-voltage as 3.3V instead of 3.0V, while OMAP3x
and OMAP4x are still quoting 3.0V. So, as of now, the pbias driver
needs to support both 3.0V and 3.3V IO voltage based on the max-voltage
supported by the PBIAS regulator.
Document reference:
SWPU249AF - OMAP543x Technical reference manual - August 2016
SPRUI30C â?? DRA75x, DRA74x Technical reference manual November 2016
Tested on:
DRA75x PG 2.0 REV H EVM
Signed-off-by: Ravikumar Kattekola <rk@xxxxxx>
Signed-off-by: Sekhar Nori <nsekhar@xxxxxx>
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
drivers/regulator/pbias-regulator.c | 21 ++++++++++++++++++---
1 file changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/regulator/pbias-regulator.c b/drivers/regulator/pbias-regulator.c
index 0cb76ba29e84..8f782d22fdbe 100644
--- a/drivers/regulator/pbias-regulator.c
+++ b/drivers/regulator/pbias-regulator.c
@@ -34,6 +34,8 @@ struct pbias_reg_info {
u32 vmode;
unsigned int enable_time;
char *name;
+ const unsigned int *pbias_volt_table;
+ int n_voltages;
};
struct pbias_regulator_data {
@@ -49,11 +51,16 @@ struct pbias_of_data {
unsigned int offset;
};
-static const unsigned int pbias_volt_table[] = {
+static const unsigned int pbias_volt_table_3_0V[] = {
1800000,
3000000
};
+static const unsigned int pbias_volt_table_3_3V[] = {
+ 1800000,
+ 3300000
+};
+
static const struct regulator_ops pbias_regulator_voltage_ops = {
.list_voltage = regulator_list_voltage_table,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -69,6 +76,8 @@ static const struct pbias_reg_info pbias_mmc_omap2430 = {
.vmode = BIT(0),
.disable_val = 0,
.enable_time = 100,
+ .pbias_volt_table = pbias_volt_table_3_0V,
+ .n_voltages = 2,
.name = "pbias_mmc_omap2430"
};
@@ -77,6 +86,8 @@ static const struct pbias_reg_info pbias_sim_omap3 = {
.enable_mask = BIT(9),
.vmode = BIT(8),
.enable_time = 100,
+ .pbias_volt_table = pbias_volt_table_3_0V,
+ .n_voltages = 2,
.name = "pbias_sim_omap3"
};
@@ -86,6 +97,8 @@ static const struct pbias_reg_info pbias_mmc_omap4 = {
.disable_val = BIT(25),
.vmode = BIT(21),
.enable_time = 100,
+ .pbias_volt_table = pbias_volt_table_3_0V,
+ .n_voltages = 2,
.name = "pbias_mmc_omap4"
};
@@ -95,6 +108,8 @@ static const struct pbias_reg_info pbias_mmc_omap5 = {
.disable_val = BIT(25),
.vmode = BIT(21),
.enable_time = 100,
+ .pbias_volt_table = pbias_volt_table_3_3V,
+ .n_voltages = 2,
.name = "pbias_mmc_omap5"
};
@@ -199,8 +214,8 @@ static int pbias_regulator_probe(struct platform_device *pdev)
drvdata[data_idx].desc.owner = THIS_MODULE;
drvdata[data_idx].desc.type = REGULATOR_VOLTAGE;
drvdata[data_idx].desc.ops = &pbias_regulator_voltage_ops;
- drvdata[data_idx].desc.volt_table = pbias_volt_table;
- drvdata[data_idx].desc.n_voltages = 2;
+ drvdata[data_idx].desc.volt_table = info->pbias_volt_table;
+ drvdata[data_idx].desc.n_voltages = info->n_voltages;
drvdata[data_idx].desc.enable_time = info->enable_time;
drvdata[data_idx].desc.vsel_reg = offset;
drvdata[data_idx].desc.vsel_mask = info->vmode;
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
