Hi,
On 08/28/2017 04:49 AM, Adrian Hunter wrote:
On 25/08/17 01:19, Zhoujie Wu wrote:
Enable runtime pm support for xenon controller, which uses 50ms
auto runtime suspend by default.
This patch seems to break system system. Does it really make sense to have
2 separate patches? Maybe consider putting them together.
You are right, I will put them together. thanks.
Signed-off-by: Zhoujie Wu <zjwu@xxxxxxxxxxx>
---
drivers/mmc/host/sdhci-xenon.c | 61 +++++++++++++++++++++++++++++++++++++++++-
1 file changed, 60 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index 306ffaf..517ff2e 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -18,6 +18,8 @@
#include <linux/ktime.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
#include "sdhci-pltfm.h"
#include "sdhci-xenon.h"
@@ -506,13 +508,24 @@ static int xenon_probe(struct platform_device *pdev)
if (err)
goto err_clk;
+ pm_runtime_get_noresume(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
I would expect to see a corresponding pm_runtime_disable() in xenon_remove()
e.g.
pm_runtime_get_sync(dev);
pm_runtime_disable(dev);
pm_runtime_put_noidle(dev);
sdhci_remove_host(host, 0);
+ pm_suspend_ignore_children(&pdev->dev, 1);
+
err = sdhci_add_host(host);
if (err)
goto remove_sdhc;
+ pm_runtime_put_autosuspend(&pdev->dev);
+
return 0;
remove_sdhc:
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
xenon_sdhc_unprepare(host);
err_clk:
clk_disable_unprepare(pltfm_host->clk);
@@ -577,6 +590,52 @@ static int xenon_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(xenon_pmops, xenon_suspend, xenon_resume);
+#ifdef CONFIG_PM
+static int xenon_runtime_suspend(struct device *dev)
+{
+ struct sdhci_host *host = dev_get_drvdata(dev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ int ret;
+
+ ret = sdhci_runtime_suspend_host(host);
+
+ if (host->tuning_mode != SDHCI_TUNING_MODE_3)
+ mmc_retune_needed(host->mmc);
+
+ clk_disable_unprepare(pltfm_host->clk);
+ /*
+ * Need to update the priv->clock here, or when runtime resume
+ * back, phy don't aware the clock change and won't adjust phy
+ * which will cause cmd err
+ */
+ priv->clock = 0;
+ return ret;
+}
+
+static int xenon_runtime_resume(struct device *dev)
+{
+ struct sdhci_host *host = dev_get_drvdata(dev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ int ret;
+
+ ret = clk_prepare_enable(pltfm_host->clk);
+ if (ret) {
+ dev_err(dev, "can't enable mainck\n");
+ return ret;
+ }
+
+ return sdhci_runtime_resume_host(host);
+}
+#endif /* CONFIG_PM */
+
+static const struct dev_pm_ops sdhci_xenon_dev_pm_ops = {
+ SET_RUNTIME_PM_OPS(xenon_runtime_suspend,
+ xenon_runtime_resume,
+ NULL)
+};
+
+
static const struct of_device_id sdhci_xenon_dt_ids[] = {
{ .compatible = "marvell,armada-ap806-sdhci",},
{ .compatible = "marvell,armada-cp110-sdhci",},
@@ -589,7 +648,7 @@ static int xenon_resume(struct device *dev)
.driver = {
.name = "xenon-sdhci",
.of_match_table = sdhci_xenon_dt_ids,
- .pm = &xenon_pmops,
+ .pm = &sdhci_xenon_dev_pm_ops,
},
.probe = xenon_probe,
.remove = xenon_remove,
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
