On 23 August 2017 at 07:42, Kishon Vijay Abraham I <kishon@xxxxxx> wrote:
> Add binding for the TI's sdhci-omap controller. This now includes only
> a subset of properties documented in ti-omap-hsmmc.txt but will eventually
> include all the properties.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
> ---
> Changes from v2:
> *) Fixed example to use the updated compatible
>
> Changes from v1:
> *) Create a new sdhci-omap.txt document for TI's sdhci-omap controller instead
> of using the ti-omap-hsmmc.txt as suggested by Tony
> .../devicetree/bindings/mmc/sdhci-omap.txt | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-omap.txt
>
> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt
> new file mode 100644
> index 000000000000..139695ad2d58
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt
> @@ -0,0 +1,22 @@
> +* TI OMAP SDHCI Controller
> +
> +Refer to mmc.txt for standard MMC bindings.
> +
> +Required properties:
> +- compatible: Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers
> +- ti,hwmods: Must be "mmc<n>", <n> is controller instance starting 1
> +
> +Optional properties:
> +- ti,dual-volt: boolean, supports dual voltage cards
> +- ti,non-removable: non-removable slot (like eMMC)
> +
> +Example:
> + mmc1: mmc@0x4809c000 {
> + compatible = "ti,dra7-sdhci";
> + reg = <0x4809c000 0x400>;
> + ti,hwmods = "mmc1";
> + ti,dual-volt;
> + bus-width = <4>;
> + vmmc-supply = <&vmmc>; /* phandle to regulator node */
> + ti,non-removable;
> + };
> --
> 2.11.0
>
I am wondering a bit on the long term plan here.
Ideally at some point in future, we would like to remove the old
omap_hsmmc driver, but from compatible string point of view, that
means we first needs to deprecate the old ones for a while. Right?
That said, what is then the reason to why we should bring over the
existing omap_hsmmc bindings to the sdhci-omap bindings?
For example, "ti,dual-volt" can likely be replaced with something
better that already exists (either a common mmc binding or an sdhci
binding). For "ti,non-removable", we already have a common mmc binding
"non-removable" for this.
Kind regards
Uffe
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
