On 21 August 2017 at 18:02, Jerome Brunet <jbrunet@xxxxxxxxxxxx> wrote:
> spinlock used in interrupt handler should use the _irqsave variant
Exactly why is that needed?
>
> Fixes: 51c5d8447bd7 ("MMC: meson: initial support for GX platforms")
> Reviewed-by: Kevin Hilman <khilman@xxxxxxxxxxxx>
> Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
> ---
> drivers/mmc/host/meson-gx-mmc.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
> index 8a74a048db88..a399fbd415f4 100644
> --- a/drivers/mmc/host/meson-gx-mmc.c
> +++ b/drivers/mmc/host/meson-gx-mmc.c
> @@ -727,6 +727,7 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
> struct mmc_command *cmd;
> struct mmc_data *data;
> u32 irq_en, status, raw_status;
> + unsigned long flag;
> irqreturn_t ret = IRQ_HANDLED;
>
> if (WARN_ON(!host))
> @@ -739,7 +740,7 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
>
> data = cmd->data;
>
> - spin_lock(&host->lock);
> + spin_lock_irqsave(&host->lock, flag);
> irq_en = readl(host->regs + SD_EMMC_IRQ_EN);
> raw_status = readl(host->regs + SD_EMMC_STATUS);
> status = raw_status & irq_en;
> @@ -806,7 +807,7 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
> if (ret == IRQ_HANDLED)
> meson_mmc_request_done(host->mmc, cmd->mrq);
>
> - spin_unlock(&host->lock);
> + spin_unlock_irqrestore(&host->lock, flag);
> return ret;
> }
>
> --
> 2.9.5
>
Kind regards
Uffe
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
