On 18 August 2017 at 07:19, Vijay Viswanath <vviswana@xxxxxxxxxxxxxx> wrote: > Register writes which change voltage of IO lines or turn the IO bus on/off > require sdhc controller to be ready before progressing further. Once a > register write which affects IO lines is done, the driver should wait for > power irq from controller. Once the irq comes, the driver should acknowledge > the irq by writing to power control register. If the acknowledgement is not > given to controller, the controller may not complete the corresponding > register write action and this can mess up the controller if drivers proceeds > without power irq completing. > > Sahitya Tummala (2): > mmc: sdhci-msm: Fix HW issue with power IRQ handling during reset > mmc: sdhci-msm: Add support to wait for power irq > > Subhash Jadavani (1): > mmc: sdhci-msm: fix issue with power irq > > Vijay Viswanath (2): > mmc: sdhci-msm: Add ops to do sdhc register write > defconfig: msm: Enable CONFIG_MMC_SDHCI_IO_ACCESSORS > > arch/arm64/configs/defconfig | 1 + > drivers/mmc/host/sdhci-msm.c | 233 ++++++++++++++++++++++++++++++++++++++++++- > 2 files changed, 229 insertions(+), 5 deletions(-) > > -- > Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc. > Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project. > Looks good to me, besides patch 5 which I provided comments for. Unless Adrian objects, I intend to queue this within the next couple of days. Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
