Enhance mmc_blk_data_prep() to support CQE requests. That means adding
some things that for non-CQE requests would be encoded into the command
arguments - such as the block address, reliable-write flag, and data tag
flag. Also the request tag is needed to provide the command queue task id,
and a comment is added to explain the future possibility of defining a
priority.
Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
---
drivers/mmc/core/block.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index bd7a899979d4..d8677b28af5c 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -1505,6 +1505,7 @@ static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq,
memset(brq, 0, sizeof(struct mmc_blk_request));
brq->mrq.data = &brq->data;
+ brq->mrq.tag = req->tag;
brq->stop.opcode = MMC_STOP_TRANSMISSION;
brq->stop.arg = 0;
@@ -1519,6 +1520,14 @@ static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq,
brq->data.blksz = 512;
brq->data.blocks = blk_rq_sectors(req);
+ brq->data.blk_addr = blk_rq_pos(req);
+
+ /*
+ * The command queue supports 2 priorities: "high" (1) and "simple" (0).
+ * The eMMC will give "high" priority tasks priority over "simple"
+ * priority tasks. Here we always set "simple" priority by not setting
+ * MMC_DATA_PRIO.
+ */
/*
* The block layer doesn't support all sector count
@@ -1548,8 +1557,10 @@ static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq,
brq->data.blocks);
}
- if (do_rel_wr)
+ if (do_rel_wr) {
mmc_apply_rel_rw(brq, card, req);
+ brq->data.flags |= MMC_DATA_REL_WR;
+ }
/*
* Data tag is used only during writing meta data to speed
@@ -1561,6 +1572,9 @@ static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq,
((brq->data.blocks * brq->data.blksz) >=
card->ext_csd.data_tag_unit_size);
+ if (do_data_tag)
+ brq->data.flags |= MMC_DATA_DAT_TAG;
+
mmc_set_data_timeout(&brq->data, card);
brq->data.sg = mqrq->sg;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
