Make use of the 64 bit sdbuf width on Renesas R-Car Gen3. If the
registers are 8 byte apart, the width is also 64 bit. For all others,
the width is 32 bit, even if the registers are only 16 bit apart.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
Change since v1:
* width calculation is now fully backwards compatible. If it is not 8 byte
apart (which is only on Gen3), we will always default to 32 as before.
Thanks to Biju Das and Simon Horman for the error reports!
Tested on a M3-W Salvator-X and H2 Lager (with both SDHI instances). On
the Lager, I could reproduce the problem with the old patch. It is gone now!
drivers/mmc/host/renesas_sdhi_core.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index dd215723fa4312..a252145097d6a5 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -459,10 +459,11 @@ static int renesas_sdhi_multi_io_quirk(struct mmc_card *card,
static void renesas_sdhi_enable_dma(struct tmio_mmc_host *host, bool enable)
{
- sd_ctrl_write16(host, CTL_DMA_ENABLE, enable ? DMA_ENABLE_DMASDRW : 0);
+ /* Iff regs are 8 byte apart, sdbuf is 64 bit. Otherwise always 32. */
+ int width = (host->bus_shift == 2) ? 64 : 32;
- /* enable 32bit access if DMA mode if possibile */
- renesas_sdhi_sdbuf_width(host, enable ? 32 : 16);
+ sd_ctrl_write16(host, CTL_DMA_ENABLE, enable ? DMA_ENABLE_DMASDRW : 0);
+ renesas_sdhi_sdbuf_width(host, enable ? width : 16);
}
int renesas_sdhi_probe(struct platform_device *pdev,
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
