On 11 July 2017 at 02:38, Shawn Lin <shawn.lin@xxxxxxxxxxxxxx> wrote:
> Hi Haibo,
>
> On 2017/7/7 17:08, Haibo Chen wrote:
>>
>> Change the default err value to -EINVAL, otherwise signal voltage
>> will not change to 1V8 if card or controller only support 1V8 for
>> HS400ES mode.
>>
>
> This description is misleading as hs400(es) must be running under
> 1.8v vqmmc. But the patch itself is correct.
>
>
>> Fixes: commit 1720d3545b77 ("mmc: core: switch to 1V8 or 1V2 for hs400es
>> mode")
>> Cc: <stable@xxxxxxxxxxxxxxx>
>> Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx>
>> ---
>> drivers/mmc/core/mmc.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
>> index 92c6167..336a950 100644
>> --- a/drivers/mmc/core/mmc.c
>> +++ b/drivers/mmc/core/mmc.c
>> @@ -1289,7 +1289,7 @@ int mmc_hs400_to_hs200(struct mmc_card *card)
>> static int mmc_select_hs400es(struct mmc_card *card)
>> {
>> struct mmc_host *host = card->host;
>> - int err = 0;
>> + int err = -EINVAL;
>> u8 val;
>> if (!(host->caps & MMC_CAP_8_BIT_DATA)) {
>>
>
Seems like Haibo has been busy. Shawn, if you think it's important,
could you pick up this and re-submit?
Kind regards
Uffe
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
