在 2017-08-08 15:02，Chen-Yu Tsai 写道：
Some SoCs do not support clk delays for MMC in the clock control unit.
These include the old controllers in A10/A10s/A13/R8, and the new eMMC
controller in A64. The config structure for these controllers do not
specify clk_delays, but the check for this was replaced in commit
b0600daebf31 ("mmc: sunxi: Support controllers that can use both old
and new timings").
This patch adds back the check for clk_delays, and also adds comments
for both checks in sunxi_mmc_clk_set_phase().
Fixes: b0600daebf31 ("mmc: sunxi: Support controllers that can use
both old and new timings")
Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
Should I add a Tested-by here?
---
This fixes an mmc regression on A10/A10s/A13/R8 and A64 introduced
by the A83T mmc patches.
v1 was inlined in a reply to "mmc: sunxi: fix new timings mode on A64
EMMC (MMC2) controller"
Changes since v1:
- Polished comments
I've tested this on my A10 Cubieboard and A20 Cubieboard2.
---
drivers/mmc/host/sunxi-mmc.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/mmc/host/sunxi-mmc.c
b/drivers/mmc/host/sunxi-mmc.c
index 3777517982dd..9dc6d726ec49 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -722,9 +722,14 @@ static int sunxi_mmc_clk_set_phase(struct
sunxi_mmc_host *host,
{
int index;
+ /* clk controller delays not used under new timings mode */
if (host->use_new_timings)
return 0;
+ /* some old controllers don't support delays */
+ if (!host->cfg->clk_delays)
+ return 0;
+
/* determine delays */
if (rate <= 400000) {
index = SDXC_CLK_400K;
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
